Chamfering & Finishing Tools
Single and double flute chamfer mills, ball-tip finishing cutters, flat-bottom finishing cutters and extended-reach versions for deep features.
Black Coated Solid Carbide Chamfer Tool
Black Coated Solid Carbide Chamfer Tool — Ø 2 – 6 mm, Black Coated, 4-flute. 4 published diameters.
Bronze Coated Solid Carbide Chamfer Tool
Bronze Coated Solid Carbide Chamfer Tool — Ø 1.5 – 12 mm, Bronze Coated. 5 published diameters.
Chamfer Tool
Chamfer Tool — Ø 0.15 – 8 mm. 7 published diameters.
Coated Chamfer Tool
Coated Chamfer Tool — Ø 0.8 – 0.8 mm, Coated. 1 published diameters.
Die-Hole Finishing Tool
Die-Hole Finishing Tool — On request. 1 live part numbers.
Face Finishing Tool
Face Finishing Tool — Ø 11 – 28 mm. 2 published diameters.
Rainbow DLC Solid Carbide Chamfer Tool
Rainbow DLC Solid Carbide Chamfer Tool — Ø 0.15 – 0.15 mm, Rainbow DLC. 1 published diameters.
Solid Carbide Chamfer Tool
Solid Carbide Chamfer Tool — Ø 0.2 – 6 mm. 13 published diameters, 12 shown.
Solid Carbide Left-Handed Chamfer Tool
Solid Carbide Left-Handed Chamfer Tool — Ø 1.5 – 3 mm. 2 published diameters.
This filter combination is not published. Clear it and pick another.
Four things we need from you.
Diameter
Cutting diameter in mm.
Tip geometry
Ball, flat or chamfered. The tip decides the corner it can clean up.
Coating
Black oxide, bronze, DLC or uncoated.
Flute count
1 or 2 flutes.
Matched applications.
Edge breaking
Removing burrs from drilled holes and machined slots in one pass.
Fine finishing
Cleaning up a corner or a radius a general mill leaves behind.
Deep features
Extended-reach cutters for features below the surrounding floor.
Technical notes.
Micro Drill Selection: Diameter, Depth, Material and Point Geometry
Choosing a micro drill is a four-variable problem: diameter, hole depth as a multiple of diameter, workpiece material and point ge
September 28, 2026Micro End Mill Selection Guide for Miniature Features
Flat, ball nose, V-bit or chamfer? Micro end mill selection comes down to the feature geometry, the chip load available at small d
September 16, 2026Micro Reamers: Achieving Tight Hole Size Control
Reamers exist because drills cannot hold the tolerance. This guide covers spiral versus straight reamers, taper reamers, runout se
September 4, 2026Tell us the feature — we will specify the tool.
Diameter, working depth, workpiece material and hardness are enough to start. Reply window: Engineering reply within 1 business day.
