PCD & Diamond Tooling
Diamond high-gloss cutters, PCD ball mills, PCD composite tools and tetrahedral diamond cutters. For glass, ceramics, quartz and hardened coatings.
Coated PCD Drill
Coated PCD Drill — Ø 0.15 – 3.8 mm, Coated, 4-flute. 24 published diameters, 12 shown.
PCD Drill
PCD Drill — Ø 0.48 – 0.9 mm. 2 published diameters.
This filter combination is not published. Clear it and pick another.
Four things we need from you.
Diameter
Cutting diameter in mm.
PCD form
Ball, ball-nose, composite or tetrahedral (four-sided).
Coating
None — the PCD segment is the cutting face.
Flute count
As published for the form.
Matched applications.
Glass & quartz
Edge grinding and finishing where abrasive wear kills carbide in minutes.
Hard coatings
TiAlN, ceramic and DLC surfaces that need a finish above Ra 0.4.
Ceramic components
Alumina and zirconia parts where chip load must stay tiny and consistent.
Technical notes.
Micro Drill Selection: Diameter, Depth, Material and Point Geometry
Choosing a micro drill is a four-variable problem: diameter, hole depth as a multiple of diameter, workpiece material and point ge
September 28, 2026Micro End Mill Selection Guide for Miniature Features
Flat, ball nose, V-bit or chamfer? Micro end mill selection comes down to the feature geometry, the chip load available at small d
September 16, 2026Micro Reamers: Achieving Tight Hole Size Control
Reamers exist because drills cannot hold the tolerance. This guide covers spiral versus straight reamers, taper reamers, runout se
September 4, 2026Tell us the feature — we will specify the tool.
Diameter, working depth, workpiece material and hardness are enough to start. Reply window: Engineering reply within 1 business day.
