Formed & Composite Tools
Single and double flute composite cutters, two-section forming cutters and IC card milling cutters — multi-segment shapes that a single-profile tool cannot cut in one pass.
Black Coated Extrusion Tool
Black Coated Extrusion Tool — Ø 0.12 – 0.17 mm, Black Coated. 2 published diameters.
Left-Handed Forming Tool
Left-Handed Forming Tool — Ø 0.45 – 0.45 mm. 1 published diameters.
Right-Handed Forming Tool
Right-Handed Forming Tool — Ø 0.45 – 0.45 mm. 1 published diameters.
Solid Carbide Forming Tool
Solid Carbide Forming Tool — Ø 3.02 – 3.02 mm. 1 published diameters.
This filter combination is not published. Clear it and pick another.
Four things we need from you.
Diameter
Cutting diameter in mm.
Section count
Two sections per tool for the multi-section forms.
Coating
Black oxide, bronze, DLC or uncoated.
Flute count
1 or 2 flutes.
Matched applications.
IC & smart card
Window milling to a single profile tolerance per card.
Multi-profile parts
Features that would otherwise need two setups and a re-fixturing step.
Technical notes.
Micro Drill Selection: Diameter, Depth, Material and Point Geometry
Choosing a micro drill is a four-variable problem: diameter, hole depth as a multiple of diameter, workpiece material and point ge
September 28, 2026Micro End Mill Selection Guide for Miniature Features
Flat, ball nose, V-bit or chamfer? Micro end mill selection comes down to the feature geometry, the chip load available at small d
September 16, 2026Micro Reamers: Achieving Tight Hole Size Control
Reamers exist because drills cannot hold the tolerance. This guide covers spiral versus straight reamers, taper reamers, runout se
September 4, 2026Tell us the feature — we will specify the tool.
Diameter, working depth, workpiece material and hardness are enough to start. Reply window: Engineering reply within 1 business day.
