ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION
6 coating options · 154 grinding series

Coating index

Coatings change edge life, heat resistance and the material a tool can cut. Each coating below carries the part numbers, series and measured diameter range actually recorded for it in our catalogue.

Coatings6options
Part numbers11,717in the catalogue
Series154across all coatings
Families4of tooling
DLC
562 sku
TiN
3,162 sku
black
2,799 sku
bronze
1,682 sku
coated
189 sku
uncoated
3,323 sku

01Coating overview

6 coatings
CoatingPart numbers Typical series Diameter rangeSeries using it
DLC562DC336, DC336L, EC336, DC2260.07–10mm34
TiN3,162HDCS636, HDC636, DC636, HDCC6360.04–6.03mm20
black2,799DC426, DC426L, DC836, D07690.03–12mm54
bronze1,682DC836, DC426, DC836L, DC426L0.04–17.2mm43
coated189DC526, DC836, D0769, DC4260.05–25mm47
uncoated3,323DC326, DC326L, HDC326, DC8260.03–25mm76

02How to read this table

Typical series are the four series with the most part numbers assigned to that coating. Diameter range is the smallest and largest measured diameter across those part numbers. Open a coating for the full part-number matrix, the series list and the geometry notes.

Coating data from the catalogue

All dimensions on this site come from our production catalogue (11,717 part numbers).