01Part numbers on uncoated
3,323 records| Part number | Description | Diameter (mm) | Series | Flute (mm) | OAL (mm) | Geometry |
|---|---|---|---|---|---|---|
| HDC326-1550-03 | Solid carbide drill (not for shrink-fit holders) | 1.55 | HDC326 | 12 | 38 | D1.55*12*3.175*38*118° |
| KTP28L-1200 | Solid carbide cutting tool | 1.2 | Solid carbide cutting tool | — | — | 1.2FA-A45 |
| DC826-4000-03 | Solid carbide drill | 4 | DC826 | 20 | 50 | D4.00*20*4*50 |
| DC326-3000 | Solid carbide drill | 3 | DC326 | 12 | 38 | D3.00*12*3*38 |
| DC326-1900 | Solid carbide drill | 1.9 | DC326 | 12 | 38 | D1.90*12*3*38 |
| DC326-1700 | Solid carbide drill | 1.7 | DC326 | 12 | 38 | D1.70*12*3*38 |
| DC326-1800 | Solid carbide drill | 1.8 | DC326 | 12 | 38 | D1.80*12*3*38 |
| DC326L-1000 | Extended-length solid carbide drill | 1 | DC326L | 15 | 50 | D1.00*15*3*50 |
| HDC326-1250-08 | Solid carbide drill (not for shrink-fit holders) | 1.25 | HDC326 | 12 | 38 | D1.25*12*3.175*38*118° |
| DC326-1200-02 | Solid carbide drill | 1.2 | DC326 | 8 | 50 | D1.20*8*3*50 |
| HDC326-0250-15 | Solid carbide drill (not for shrink-fit holders) | 0.25 | HDC326 | 7.5 | 38 | D0.25*7.5*3.175*38*118° |
| HEC-326-0500 | Solid carbide engraving cutter (not for shrink-fit holders) | 0.5 | HEC | — | — | D0.50*4.5*3.175*38*2F |
| DC326-0310 | Solid carbide drill | 0.31 | DC326 | 5 | 38 | D0.31*5*3*38 |
| DC326-0500 | Solid carbide drill | 0.5 | DC326 | 6 | 38 | D0.50*6*3*38 |
| DC326-1450 | Solid carbide drill | 1.45 | DC326 | 10 | 38 | D1.45*10*3*38 |
| DC326-1850 | Solid carbide drill | 1.85 | DC326 | 12 | 38 | D1.85*12*3*38 |
| DC326-2350 | Solid carbide drill | 2.35 | DC326 | 12 | 38 | D2.35*12*3*38 |
| DC326-2850 | Solid carbide drill | 2.85 | DC326 | 12 | 38 | D2.85*12*3*38 |
| DC326-0200 | Solid carbide drill | 0.2 | DC326 | 3.5 | 38 | D0.20*3.5*3*38 |
| HDC326-0500-02 | Solid carbide drill (not for shrink-fit holders) | 0.5 | HDC326 | 4 | 38 | D0.50*4*3.175*38*118° |
| DC826-2780-02 | Solid carbide drill | 2.78 | DC826 | 11 | 50 | D2.78*11*4*50*130° |
| DCS326-0002 | Step solid carbide drill | 3 | DCS326 | — | — | D3.0+2.9*3.87 |
| DC326-0430 | Solid carbide drill | 0.43 | DC326 | 6 | 38 | D0.43*6*3*38 |
| DC326-0570 | Solid carbide drill | 0.57 | DC326 | 6 | 38 | D0.57*6*3*38 |
| HDC326-0500-04 | Solid carbide drill (not for shrink-fit holders) | 0.5 | HDC326 | 5 | 38 | D0.50*5*3.175*38*118° |
| EC326-3000-06 | Flat-bottom for aluminium solid carbide end mill | 3 | EC326 | — | — | D3.00*5+2.9*6.5*6*50*3F |
| DC326L-1800-02 | Extended-length solid carbide drill | 1.8 | DC326L | 20 | 51 | D1.80*20*3*51 |
| DC326L-2750-03 | Extended-length solid carbide drill | 2.75 | DC326L | 22 | 66 | D2.75*22*3*66 |
| DC826-3650-03 | Solid carbide drill | 3.65 | DC826 | 28 | 74 | D3.65*28*4*74 |
| HDC326-0328-02 | Solid carbide drill (not for shrink-fit holders) | 0.33 | HDC326 | 6.5 | 38 | D0.328*6.5*3.175*38*118° |
| HDC326-0325-03 | Solid carbide drill (not for shrink-fit holders) | 0.33 | HDC326 | 5.5 | 38 | D0.325*5.5*3.175*38*118° |
| DC826-0400-06 | Solid carbide drill | 0.4 | DC826 | 2 | 40 | D0.40*2*4*40*160° |
| DC326L-1750-01 | Extended-length solid carbide drill | 1.75 | DC326L | 15 | 38 | D1.75*15*3.175*38 |
| HDC326-1080-06 | Solid carbide drill (not for shrink-fit holders) | 1.08 | HDC326 | 12 | 38 | D1.08*12*3.175*38*118° |
| HDCC326-0150-02 | Spotting solid carbide drill (not for shrink-fit holders) | 0.15 | HDCC326 | 1 | 38 | D0.15*1*3.175*38*90° |
| HDCC326-0250-02 | Spotting solid carbide drill (not for shrink-fit holders) | 0.25 | HDCC326 | 1 | 38 | D0.25*1*3.175*38*90° |
| DC826-4600-02 | Solid carbide drill | 4.6 | DC826 | 36 | 74 | D4.60*36*6*74 |
| DC826-5500-02 | Solid carbide drill | 5.5 | DC826 | 44 | 82 | D5.50*44*6*82 |
| DC826-7300-02 | Solid carbide drill | 7.3 | DC826 | 53 | 91 | D7.3*53*8*91 |
| DC326L-2400 | Extended-length solid carbide drill | 2.4 | DC326L | 25 | 60 | D2.40*25*3*60 |
Showing 40 of 3,323 part numbers recorded with the uncoated coating. Flute and overall length are catalogue values; the geometry string is reproduced verbatim.
02Series using uncoated
76 series| Series | Description | Part numbers | Diameter range | Application |
|---|---|---|---|---|
| DC326 | Solid carbide drill | 542 | 0.04–3.17mm | Engineering plastics, copper alloys, stainless steel, aluminium, graphite and ceramics. |
| DC326L | Extended-length solid carbide drill | 517 | 0.04–3.01mm | Deep holes in engineering plastics and non-ferrous metals. |
| HDC326 | Solid carbide drill (not for shrink-fit holders) | 507 | 0.03–4.1mm | — |
| DC826 | Solid carbide drill | 399 | 0.13–10.3mm | General purpose carbide drilling for metal and laminate stacks. |
| DCS326 | Step solid carbide drill | 172 | 0.2–8mm | — |
| HDCS626 | Left-hand step solid carbide drill | 172 | 0.58–2.3mm | — |
| DC826L | Extended-length solid carbide drill | 136 | 0.1–11.2mm | — |
| EC326 | Flat-bottom for aluminium solid carbide end mill | 114 | 0.15–16mm | — |
| CM326 | Helical solid carbide reamer | 67 | 0.41–6.33mm | — |
| HDC626 | Left-hand solid carbide drill | 64 | 0.29–2.82mm | — |
| FC326 | Solid carbide drill | 57 | 0.1–5.63mm | — |
| DCS626 | Left-hand step solid carbide drill | 57 | 0.85–5.53mm | — |
| DC726 | Straight-shank solid carbide drill | 57 | 0.5–8.6mm | — |
| DC326XL | Extra-long solid carbide drill | 53 | 0.3–2.5mm | — |
| DC126 | Flat-bottom solid carbide drill | 45 | 0.22–7.9mm | — |
| DCC326 | Spotting solid carbide drill | 43 | 0.1–8mm | — |
| DP | Solid carbide insert / blade | 34 | 3–3mm | — |
| DCD326 | Solid carbide cutting tool | 31 | 0.1–8mm | — |
| DC626 | Left-hand solid carbide drill | 27 | 0.46–7.5mm | — |
| FC626 | Left-hand solid carbide drill | 26 | 0.15–6.94mm | — |
| DC826XL | Extra-long solid carbide drill | 24 | 0.1–2.25mm | — |
| FDCS626 | Left-hand step solid carbide drill | 24 | 0.8–4.93mm | — |
| HDCC326 | Spotting solid carbide drill (not for shrink-fit holders) | 12 | 0.12–1.3mm | — |
| DG | Solid carbide cutting tool | 11 | 5–5mm | — |
| DC426 | Black-coated solid carbide drill | 10 | 0.04–3mm | Steel, stainless steel, copper and aluminium alloys; general micro drilling. |
| HDCS326 | Step solid carbide drill (not for shrink-fit holders) | 10 | 0.63–1.66mm | — |
| FCS626 | Left-hand step solid carbide drill | 10 | 0.89–9.28mm | — |
| HFCS626 | Left-hand step solid carbide drill | 6 | 0.58–9.5mm | — |
| DC926 | Coolant-through solid carbide drill | 6 | 1.65–9mm | — |
| HEC | Solid carbide engraving cutter (not for shrink-fit holders) | 5 | 0.5–1.05mm | — |
| HDCD326 | Solid carbide cutting tool (not for shrink-fit holders) | 5 | 0.15–3.17mm | — |
| EC626 | Left-hand solid carbide end mill | 5 | 0.5–1.8mm | — |
| HDCC626 | Left-hand spotting solid carbide drill | 5 | 1–3mm | — |
| KTP28L | Solid carbide cutting tool | 4 | 1–1.5mm | — |
| DC836 | Bronze-coated solid carbide drill | 4 | 0.1–14mm | Steel and stainless steel where coating wear resistance is needed. |
| X326 | Solid carbide drill | 4 | 0.33–0.6mm | — |
| HFC626 | Solid carbide cutting tool | 3 | 0.71–0.92mm | — |
| FCS326 | Right-hand step solid carbide drill | 3 | 0.66–1.36mm | — |
| BC326 | Solid carbide end mill | 3 | 0.47–2mm | — |
| XMD | Solid carbide cutting tool | 2 | —–—mm | — |
| ZDP | Solid carbide cutting tool | 2 | —–—mm | — |
| M | Solid carbide cutting tool | 2 | 1.6–3mm | — |
| CM626 | Left-hand solid carbide reamer | 2 | 1.4–1.5mm | — |
| HFC326 | Solid carbide cutting tool | 2 | 0.46–0.57mm | — |
| LJ | Solid carbide cutting tool | 2 | —–—mm | — |
| FDCS326 | Right-hand step solid carbide drill | 2 | 2.6–2.6mm | — |
| DC226 | DLC-coated solid carbide drill | 2 | 0.17–3.02mm | — |
| PCD | Solid carbide drill | 2 | 0.48–0.9mm | — |
| J326 | Solid carbide drill | 2 | 0.17–0.69mm | — |
| DCC626 | Left-hand spotting solid carbide drill | 2 | 3–6mm | — |
| DCD626 | Left-hand solid carbide cutting tool | 2 | 1.5–3mm | — |
| CM | Solid carbide reamer | 1 | 5.1–5.1mm | — |
| EH326 | HSS end mill | 1 | 8–8mm | — |
| KPD10 | Solid carbide cutting tool | 1 | —–—mm | — |
| HEC326 | Solid carbide engraving cutter (not for shrink-fit holders) | 1 | 1.5–1.5mm | — |
| QCD | Solid carbide cutting tool | 1 | —–—mm | — |
| KCD | Solid carbide cutting tool | 1 | —–—mm | — |
| FCC326 | Spotting solid carbide drill | 1 | 0.65–0.65mm | — |
| CM426 | Black-coated helical solid carbide reamer | 1 | 0.14–9.56mm | Helical reaming to finished hole tolerance. |
| DC336 | DLC-coated solid carbide drill | 1 | 0.07–4.98mm | Copper, aluminium and non-ferrous alloys with DLC low-friction flutes. |
| DC | Extended-length solid carbide drill | 1 | 0.18–0.18mm | — |
| DCS0769 | Step HSS drill | 1 | 2–2mm | — |
| D0769 | Black-coated HSS drill | 1 | 0.3–8mm | HSS micro drilling as a lower-cost alternative on soft materials. |
| RC326 | Solid carbide end mill | 1 | 0.7–0.7mm | — |
| DC726XL | Extended-length straight-shank solid carbide drill | 1 | 6.4–6.4mm | — |
| ECS326 | Step solid carbide drill | 1 | 1–1mm | — |
| DC226L | Black-coated solid carbide drill | 1 | 0.62–2.3mm | — |
| GD626 | Solid carbide cutting tool | 1 | —–—mm | — |
| HDCS636 | TiN-coated left-hand step solid carbide drill | 1 | 0.43–3mm | Non-standard step drilling for stepped and counterbored holes. |
| JP | Coated solid carbide saw blade | 1 | 15–25mm | — |
| TD | Solid carbide cutting tool | 1 | 2.5–2.5mm | — |
| X826 | Solid carbide drill | 1 | 3.08–3.08mm | — |
| T326 | Solid carbide cutting tool | 1 | 7–7mm | — |
| HDC126 | Flat-bottom solid carbide drill (not for shrink-fit holders) | 1 | 0.18–0.18mm | — |
| DC926L | Coolant-through solid carbide drill | 1 | 0.5–0.5mm | — |
| HFCS326 | Right-hand step solid carbide drill | 1 | 0.58–0.58mm | — |
03Geometry notes
From the catalogue recordsThe geometry strings below are taken verbatim from part numbers recorded with the uncoated coating. They illustrate the flute, point and multi-diameter callouts available in this group.
D1.55*12*3.175*38*118°· HDC326-1550-031.2FA-A45· KTP28L-1200D4.00*20*4*50· DC826-4000-03D3.00*12*3*38· DC326-3000D1.90*12*3*38· DC326-1900
04Frequently asked questions
How many tools carry the uncoated coating?
The catalogue records 3,323 part numbers with the uncoated coating, spread across 76 series. The measured diameter range is 0.03–25 mm.
Which series can I get this coating on?
Section 02 lists every series recorded with this coating. Series with their own landing page link through to a full specification and part matrix; the others are shown as plain codes.
What is this coating used for?
Based on the series records that use uncoated, typical applications include Engineering plastics, copper alloys, stainless steel, aluminium, graphite and ceramics; Deep holes in engineering plastics and non-ferrous metals. Confirm the exact grade and geometry with our team before ordering.