For process engineers
The table is a production record, not a sales range.
DCC326 — Spotting solid carbide drill
A real production series with 43 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 43
- Diameter span
- 0.1–8 mm
- Coating
- Uncoated
Part numbers in DCC326
43 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DCC326-0100Repeat order | Spotting solid carbide drill | 0.1 | 0.5 | 3 | 38 | 90° | Standard |
| DCC326-0100-02 | Spotting solid carbide drill | 0.1 | 0.5 | 4 | 50 | 90° | Standard |
| DCC326-0135 | Spotting solid carbide drill | 0.135 | 0.5 | 3 | 38 | 90° | Standard |
| DCC326-0135-02 | Spotting solid carbide drill | 0.135 | 0.5 | 3.175 | 38 | 90° | Standard |
| DCC326-0150 | Spotting solid carbide drill | 0.15 | 1 | 3 | 38 | 90° | Standard |
| DCC326-0150-02 | Spotting solid carbide drill | 0.15 | 0.5 | 4 | 50 | 90° | Standard |
| DCC326-0200 | Solid carbide cutting tool | 0.2 | 1 | 3 | 38 | 90° | Standard |
| DCC326-0200-02 | Spotting solid carbide drill | 0.2 | 1 | 3 | 38 | 90° | Standard |
| DCC326-0250 | Spotting solid carbide drill | 0.25 | 1.5 | 3 | 38 | 90° | Standard |
| DCC326-0250-02 | Spotting solid carbide drill | 0.25 | 0.5 | 4 | 50 | 90° | Standard |
| DCC326-0250-03 | Spotting solid carbide drill | 0.25 | 3.5 | 3 | 38 | 90° | Standard |
| DCC326-0275 | Spotting solid carbide drill | 0.275 | 1.5 | 3 | 38 | 90° | Standard |
| DCC326-0300Repeat order | Spotting solid carbide drill | 0.3 | 2 | 3 | 38 | 90° | Standard |
| DCC326-0300-02 | Spotting solid carbide drill | 0.3 | 3 | 3.175 | 38 | 90° | Standard |
| DCC326-0350 | Spotting solid carbide drill | 0.35 | 2 | 3 | 38 | 90° | Standard |
| DCC326-0360 | Spotting solid carbide drill | 0.36 | — | — | — | — | View full callout |
| DCC326-0370-01 | Spotting solid carbide drill | 0.37 | 2 | 3 | 38 | 90° | Standard |
| DCC326-0400 | Spotting solid carbide drill | 0.4 | 2 | 3 | 38 | 90° | Standard |
| DCC326-0400-03 | Spotting solid carbide drill | 0.4 | 0.5 | 4 | 50 | 90° | Standard |
| DCC326-0500 | Spotting solid carbide drill | 0.5 | 3 | 3 | 38 | 90° | Standard |
| DCC326-0500-03 | Spotting solid carbide drill | 0.5 | 3 | 3.175 | 38 | 90° | Standard |
| DCC326-0500-05 | Spotting solid carbide drill | 0.5 | 5 | 3.175 | 38 | 90° | Standard |
| DCC326-0600 | Spotting solid carbide drill | 0.6 | 3 | 3 | 38 | 90° | Standard |
| DCC326-0700 | Spotting solid carbide drill | 0.7 | 3 | 3 | 38 | 90° | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.