For process engineers
The table is a production record, not a sales range.
DCC426 — Bronze-coated spotting solid carbide drill
A real production series with 101 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 101
- Diameter span
- 0.1–10 mm
- Coating
- Bronze
Part numbers in DCC426
101 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DCC426-0100-03Repeat order | Bronze-coated spotting solid carbide drill | 0.1 | 0.5 | 3 | 38 | 90° | Standard |
| DCC426-0100-03-01 | Black-coated spotting solid carbide drill | 0.1 | 0.5 | 3.175 | 38 | — | Standard |
| DCC426-0100-03-02 | Black-coated spotting solid carbide drill | 0.1 | 0.5 | 3 | 38 | 120° | Standard |
| DCC426-0100-04-03 | Black-coated spotting solid carbide drill | 0.1 | — | — | — | 120° | View full callout |
| DCC426-0100-06-01 | DLC-coated spotting solid carbide drill | 0.1 | — | — | — | 120° | View full callout |
| DCC426-0150-03Repeat order | Bronze-coated spotting solid carbide drill | 0.15 | 1 | 3 | 38 | 90° | Standard |
| DCC426-0150-04-01 | Black-coated spotting solid carbide drill | 0.15 | 0.5 | 4 | 50 | 90° | Standard |
| DCC426-0150-04-02 | Black-coated spotting solid carbide drill | 0.15 | 0.5 | 2 | 35 | 90° | Standard |
| DCC426-0180-04 | Black-coated spotting solid carbide drill | 0.18 | 0.5 | 4 | 50 | 90° | Standard |
| DCC426-0180-04-01 | Black-coated solid carbide drill | 0.18 | 0.8 | 1.5 | 38 | 160° | Standard |
| DCC426-0200-03-02Repeat order | Bronze-coated spotting solid carbide drill | 0.2 | 1 | 3 | 38 | 90° | Standard |
| DCC426-0200-03-05 | Coated spotting solid carbide drill | 0.2 | — | — | — | — | View full callout |
| DCC426-0200-04 | Black-coated spotting solid carbide drill | 0.2 | 1 | 3 | 38 | 90° | Standard |
| DCC426-0250-03 | Bronze-coated spotting solid carbide drill | 0.25 | 1.5 | 3 | 38 | 90° | Standard |
| DCC426-0300-03Repeat order | Bronze-coated spotting solid carbide drill | 0.3 | 2 | 3 | 38 | 90° | Standard |
| DCC426-0300-03-03 | Bronze-coated spotting solid carbide drill | 0.3 | 3.5 | 3 | 38 | 90° | Standard |
| DCC426-0350-03-01 | Bronze-coated spotting solid carbide drill | 0.35 | 1 | 3 | 38 | 130° | Standard |
| DCC426-0400-03Repeat order | Bronze-coated spotting solid carbide drill | 0.4 | 2 | 3 | 38 | 90° | Standard |
| DCC426-0500-03Repeat order | Bronze-coated spotting solid carbide drill | 0.5 | 3 | 3 | 38 | 90° | Standard |
| DCC426-0500-03-03 | Bronze-coated spotting solid carbide drill | 0.5 | 1 | 3 | 38 | 120° | Standard |
| DCC426-0500-04-01 | Coated solid carbide drill | 0.5 | 2 | 0.5 | 50 | 118° | Standard |
| DCC426-0500-05-01 | Bronze-coated spotting solid carbide drill | 0.5 | 3 | 3 | 38 | 90° | Standard |
| DCC426-0500-13 | Bronze-coated spotting solid carbide drill | 0.5 | 3 | 3 | 38 | 120° | Standard |
| DCC426-0500-18 | Black-coated spotting solid carbide drill | 0.5 | 3 | 3 | 38 | 120° | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.