For process engineers
The table is a production record, not a sales range.
DCC636 — TiN-coated left-hand spotting solid carbide drill
A real production series with 16 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 16
- Diameter span
- 1.35–6 mm
- Coating
- TiN
Part numbers in DCC636
16 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DCC636-1350-04-01 | Black-coated left-hand spotting solid carbide drill | 1.35 | 3 | 3 | 25 | 90° | Standard |
| DCC636-1380-01 | TiN-coated left-hand spotting solid carbide drill | 1.38 | 2.5 | 3 | 30 | 90° | Standard |
| DCC636-1400-01 | TiN-coated left-hand spotting solid carbide drill | 1.4 | 2.5 | 3 | 30 | 90° | Standard |
| DCC636-1600-01 | TiN-coated left-hand spotting solid carbide drill | 1.6 | 2.5 | 3 | 30 | 90° | Standard |
| DCC636-1750-01 | TiN-coated left-hand spotting solid carbide drill | 1.75 | 2.5 | 3 | 27 | 130° | Standard |
| DCC636-1800-01-01 | TiN-coated left-hand spotting solid carbide drill | 1.8 | 2.5 | 3 | 30 | 90° | Standard |
| DCC636-1800-15-01 | Black-coated left-hand spotting solid carbide drill | 1.8 | 4 | 3 | 28 | 70° | Standard |
| DCC636-2000-01-01 | TiN-coated left-hand spotting solid carbide drill | 2 | 4 | 3 | 30 | 90° | Standard |
| DCC636-3000-01-01 | TiN-coated left-hand spotting solid carbide drill | 3 | 6 | 6 | 30 | 90° | Standard |
| DCC636-3000-01-02 | TiN-coated left-hand spotting solid carbide drill | 3 | 10 | 3 | 30 | 90° | Standard |
| DCC636-3000-01-03 | TiN-coated left-hand spotting solid carbide drill | 3 | 7 | 3 | 25 | 95° | Standard |
| DCC636-3000-01-04 | TiN-coated left-hand spotting solid carbide drill | 3 | 5 | 3 | 25 | 98° | Standard |
| DCC636-3200-01 | TiN-coated left-hand spotting solid carbide drill | 3.175 | 4 | 3.2 | 30 | 90° | Standard |
| DCC636-3200-01-01 | TiN-coated left-hand spotting solid carbide drill | 3.2 | 6 | 3.2 | 25 | 95° | Standard |
| DCC636-4000-01-01 | TiN-coated left-hand spotting solid carbide drill | 4 | 6 | 6 | 30 | 90° | Standard |
| DCC636-6000-01-01 | TiN-coated left-hand spotting solid carbide drill | 6 | 10 | 6 | 30 | 90° | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.