For process engineers
The table is a production record, not a sales range.
HDCC626 — Left-hand spotting solid carbide drill
A real production series with 5 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 5
- Diameter span
- 1–3 mm
- Coating
- Uncoated
Part numbers in HDCC626
5 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| HDCC626-1000 | Left-hand spotting solid carbide drill | 1 | 2.5 | 3 | 30 | 90° | Standard |
| HDCC626-1200-01 | Left-hand spotting solid carbide drill | 1.2 | 2.5 | 3 | 30 | 140° | Standard |
| HDCC626-1300-05 | Left-hand spotting solid carbide drill | 1.3 | 2.5 | 3.2 | 38 | 90° | Standard |
| HDCC626-1600-08 | Left-hand spotting solid carbide drill | 1.6 | 2.5 | 3 | 30 | 105° | Standard |
| HDCC626-3000-01-02 | Left-hand spotting solid carbide drill | 3 | 4 | 3 | 30 | 90° | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.