For process engineers
The table is a production record, not a sales range.
HDCD326 — Solid carbide cutting tool (not for shrink-fit holders)
A real production series with 5 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 5
- Diameter span
- 0.15–3.175 mm
- Coating
- Uncoated
Part numbers in HDCD326
5 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| HDCD326-0150-01 | Solid carbide cutting tool (not for shrink-fit holders) | 0.15 | 1 | 3.175 | 38 | 90° | Standard |
| HDCD326-0500 | Solid carbide cutting tool (not for shrink-fit holders) | 0.5 | 2 | 3.175 | 38 | 90° | Standard |
| HDCD326-0500-04 | Solid carbide cutting tool (not for shrink-fit holders) | 0.5 | 3 | 3.175 | 38 | 90° | Standard |
| HDCD326-1000-04 | Solid carbide cutting tool (not for shrink-fit holders) | 1 | 3 | 3.175 | 38 | 90° | Standard |
| HDCD326-3175-01 | Solid carbide cutting tool (not for shrink-fit holders) | 3.175 | — | — | — | 90° | View full callout |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.