For process engineers
The table is a production record, not a sales range.
HFC426 — Black-coated right-hand solid carbide drill
A real production series with 13 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 13
- Diameter span
- 0.295–0.585 mm
- Coating
- Black
Part numbers in HFC426
13 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| HFC426-0295-04-02Repeat order | Black-coated right-hand solid carbide drill | 0.295 | — | — | — | — | View full callout |
| HFC426-0295-04-03 | Black-coated left-hand solid carbide drill | 0.295 | — | — | — | 110° | View full callout |
| HFC426-0570-04-01 | Black-coated right-hand solid carbide drill | 0.57 | 3.5 | 3 | 38 | — | Standard |
| HFC426-0575-04-01 | Black-coated left-hand solid carbide drill | 0.575 | — | — | — | 118° | View full callout |
| HFC426-0575-04-02Repeat order | Black-coated right-hand solid carbide drill | 0.575 | — | — | — | 118° | View full callout |
| HFC426-0575-04-03 | Black-coated left-hand solid carbide drill | 0.575 | — | — | — | 118° | View full callout |
| HFC426-0575-04-04 | Black-coated left-hand solid carbide drill | 0.575 | — | — | — | 118° | View full callout |
| HFC426-0580-03-01 | Bronze-coated solid carbide drill | 0.58 | 3.5 | 3 | 38 | — | Standard |
| HFC426-0580-04-04Repeat order | Black-coated right-hand solid carbide drill | 0.58 | 3.5 | 3 | 38 | — | Standard |
| HFC426-0580-14-01 | Bronze-coated solid carbide drill | 0.58 | 3.5 | 3 | 38 | — | Standard |
| HFC426-0580-17-01 | Bronze-coated solid carbide drill | 0.58 | 3.5 | 3 | 38 | — | Standard |
| HFC426-0580-18-01 | Black-coated solid carbide drill | 0.58 | 3.5 | 3 | 38 | — | Standard |
| HFC426-0585-04 | Black-coated right-hand solid carbide drill | 0.585 | 3.5 | 3 | 38 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.