For process engineers
The table is a production record, not a sales range.
RC426 — Black-coated solid carbide end mill
A real production series with 15 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 15
- Diameter span
- 0.35–13 mm
- Coating
- Black
Part numbers in RC426
15 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| RC426-0350-04 | Black-coated solid carbide end mill | 0.35 | — | — | — | — | View full callout |
| RC426-0470-04 | Black-coated solid carbide end mill | 0.47 | — | — | — | — | View full callout |
| RC426-0500-04-01 | Black-coated solid carbide end mill | 0.5 | — | — | — | — | View full callout |
| RC426-0600-04 | Black-coated solid carbide end mill | 0.6 | — | — | — | — | View full callout |
| RC426-0800-04-01 | Black-coated solid carbide end mill | 0.8 | — | — | — | — | View full callout |
| RC426-0800-04-02 | Black-coated solid carbide end mill | 0.8 | — | — | — | — | View full callout |
| RC426-1000-03-01 | Coated solid carbide end mill | 1 | — | — | — | — | View full callout |
| RC426-13000-03-01 | Bronze-coated solid carbide end mill | 13 | — | — | — | — | View full callout |
| RC426-1900-03-01 | Bronze-coated solid carbide end mill | 1.9 | — | — | — | — | View full callout |
| RC426-2000 | Coated solid carbide end mill | 2 | — | — | — | — | View full callout |
| RC426-2000-04 | Black-coated solid carbide end mill | 2 | — | — | — | — | View full callout |
| RC426-2500-04 | Black-coated solid carbide end mill | 2.5 | — | — | — | — | View full callout |
| RC426-4000-03 | Bronze-coated solid carbide end mill | 4 | — | — | — | — | View full callout |
| RC426-4000-03-01 | Bronze-coated solid carbide end mill | 4 | — | — | — | — | View full callout |
| RC426-6000-02-02 | Black-coated solid carbide end mill | 6 | — | — | — | — | View full callout |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.