For process engineers
The table is a production record, not a sales range.
YZ836 — Bronze-coated solid carbide drill
A real production series with 11 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 11
- Diameter span
- 0.44–2.5 mm
- Coating
- Bronze
Part numbers in YZ836
11 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| YZ836-0440-T01 | Bronze-coated solid carbide drill | 0.44 | 5 | 4 | 50 | 130° | Standard |
| YZ836-0500-03-01 | Bronze-coated solid carbide drill | 0.5 | 3.5 | 4 | 50 | 130° | Standard |
| YZ836-0600-03-01 | Bronze-coated solid carbide drill | 0.6 | 7 | 4 | 50 | — | Standard |
| YZ836-0850-03-01 | Bronze-coated solid carbide drill | 0.85 | 5 | 4 | 50 | — | Standard |
| YZ836-1250-01 | Coated solid carbide drill | 1.25 | 3 | 4 | 50 | 135° | Standard |
| YZ836-1500-03-01 | Bronze-coated solid carbide drill | 1.5 | 15 | 4 | 80 | — | Standard |
| YZ836-1620-04-01 | Black-coated solid carbide drill | 1.62 | 14 | 4 | 50 | — | Standard |
| YZ836-1820-04-01 | Black-coated solid carbide drill | 1.82 | 13 | 4 | 50 | 135° | Standard |
| YZ836-2000-03-01 | Bronze-coated solid carbide drill | 2 | 14 | 4 | 50 | — | Standard |
| YZ836-2400-03-01 | Bronze-coated solid carbide drill | 2.4 | 18 | 4 | 50 | 90° | Standard |
| YZ836-2500-03-02 | Bronze-coated solid carbide drill | 2.5 | 18 | 4 | 46 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.