ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION
Quality & documentation

Geometry you can check before you order

The same production data drives the catalogue, the grinding programme and the inspection record. A drawing number can be traced back to a measured specification without re-measuring a sample.

Diameter range0.03–25mm
Part numbers11,717with geometry
Coatings6indexed
Catalogue2026current edition

01Measured geometry on every record

Cutting diameter, flute length, shank diameter and overall length are stored for each catalogue item. Where a tool has more than one diameter, the full callout is reproduced verbatim rather than collapsed into a single number — that string is the information an inspector needs.

All dimensions on this site come from our production catalogue (11,717 part numbers).

02Catalogue traceability

Series pages carry the catalogue page reference, capability note and tolerance field. A part number, a diameter and a geometry string all lead to the same record, so a purchase order and an incoming inspection report can be matched line by line.

Part numbers on record11,717
Catalogue lines63,190
Grinding series154
Distinct names394
Tooling families4
Diameter range0.03–25 mm
Frequently ordered part numbers1,292
Coating options6
Abrasives, PCB stream8
Abrasives, metal stream18
Catalogue2026-2027 product catalogue, printed pages 3-60

03Consistency across the range

Coatings are assigned to the part numbers that actually carry them, and diameter steps are derived from the measured values. This avoids a common failure mode: a catalogue that lists a coating or a size that no production item uses. If a code on a drawing does not resolve, send the string and we will confirm the nearest standard geometry or a custom grind.

Check a diameter