ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION

After the drill: why PCB edges still fail inspection

A clean hole is not the end of the process. Resin overflow, burrs and copper nodules are finishing problems, not drilling problems.

2 min read 208 words Updated 2026-11-06

When a drilled board fails inspection, the first suspect is usually the drill. In a PCB line, most of the remaining defects are created or left behind by the steps after drilling.

What is actually on the surface

DefectWhere it comes fromConsumable that removes it
Resin overflowPlugging and pressingCeramic abrasive brush roller
Burr after mechanical or laser drillingHole exitHD high-density brush roller
Copper particles and nodulesAfter platingHC high-cut brush roller
Oxide or press-plate residueLamination and pressingPress-plate cleaning brush

The drill and the brush are usually bought from two suppliers. That makes root-cause analysis slow, because neither party sees the whole sequence.

Grit is a process variable

Ceramic brush rollers are supplied from 240# through 3000#, HD brushes from 320# to 1500#, HC brushes from 320# to 800#. A sequence that works on a rigid FR4 build may be too aggressive on a thin flexible laminate.

Ask for a grit sequence, not a single grit number. The defect, the board build and the machine width define the sequence.

What to send with an enquiry

  • Machine model and brush width / core.
  • Board build and copper weight.
  • Current grit sequence and the defect you are trying to remove.

We supply the cutting tools and the finishing consumables, so the hole geometry and the surface result can be specified in one conversation.

Data behind the text

Dimensions and part numbers referenced here come from the TONNY production catalogue. Open the series or diameter index to check a specific record before ordering.

Browse series   Diameter index