For machine operators
Check the shank and flute length before you load it.
DC126-2100
Flat-bottom solid carbide drill — D2.10*25*2.1*50*180°.
- Cutting diameter D1
- 2.1 mm
- Series
- DC126
- Coating
- Uncoated
Recorded geometry
D2.10*25*2.1*50*180°
Cutting diameter D1
2.1 mm
Flute length
25 mm
Shank diameter
2.1 mm
Overall length
50 mm
Point angle
180°
Substrate
Solid carbide
Coating
Uncoated
Helix hand
Right-hand
Length class
Standard
Dimensions are the geometry held on this part number. Confirm the tolerance and inspection method for your application in the written quotation. Starting cutting data is on the feeds and speeds page.
Need this geometry in a different coating?
Quote the part number and the material. We reply with a written specification and a sample date.
Other diameters in DC126
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC126-0224 | Flat-bottom solid carbide drill | 0.224 | 0.7 | 3 | 38 | — | Standard |
| DC126-0300-01 | Flat-bottom solid carbide drill | 0.3 | 5 | 3 | 50 | — | Standard |
| DC126-0353 | Flat-bottom solid carbide drill | 0.353 | — | — | — | — | View full callout |
| DC126-0370 | Flat-bottom solid carbide drill | 0.37 | 1.75 | 3 | 38 | 180° | Standard |
| DC126-0400-01 | Flat-bottom solid carbide drill | 0.4 | 5 | 3 | 50 | — | Standard |
| DC126-0445 | Flat-bottom solid carbide drill | 0.445 | 3.6 | 3 | 38 | 180° | Standard |
| DC126-0510-01 | Flat-bottom solid carbide drill | 0.51 | 3 | 3 | 38 | — | Standard |
| DC126-0600 | Flat-bottom solid carbide drill | 0.6 | — | — | — | — | View full callout |