For machine operators
Check the shank and flute length before you load it.
EC426-0200-03-05
Bronze-coated flat-bottom solid carbide end mill — D0.20*0.4*4*50.
- Cutting diameter D1
- 0.2 mm
- Series
- EC426
- Coating
- Bronze
Recorded geometry
D0.20*0.4*4*50
Cutting diameter D1
0.2 mm
Flute length
0.4 mm
Shank diameter
4 mm
Overall length
50 mm
Point angle
—
Substrate
Solid carbide
Coating
Bronze
Helix hand
Right-hand
Length class
Standard
Dimensions are the geometry held on this part number. Confirm the tolerance and inspection method for your application in the written quotation. Starting cutting data is on the feeds and speeds page.
Need this geometry in a different coating?
Quote the part number and the material. We reply with a written specification and a sample date.
Other diameters in EC426
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| EC426-0050-02-02 | Bronze-coated solid carbide end mill | 0.05 | — | — | — | — | View full callout |
| EC426-0050-03-01 | Bronze-coated solid carbide end mill | 0.05 | — | — | — | — | View full callout |
| EC426-0100-02 | Black-coated solid carbide end mill | 0.1 | — | — | — | — | View full callout |
| EC426-0100-03 | Black-coated flat-bottom solid carbide end mill | 0.1 | — | — | — | — | View full callout |
| EC426-0150-03Repeat order | Bronze-coated flat-bottom solid carbide end mill | 0.15 | — | — | — | — | View full callout |
| EC426-0150-03-02 | Bronze-coated flat-bottom solid carbide end mill | 0.15 | — | — | — | — | View full callout |
| EC426-0180-03-01Repeat order | Bronze-coated flat-bottom solid carbide end mill | 0.18 | — | — | — | — | View full callout |
| EC426-0190-03-01 | Bronze-coated flat-bottom solid carbide end mill | 0.19 | — | — | — | — | View full callout |