For process engineers
The table is a production record, not a sales range.
DC326L — Extended-length solid carbide drill
A real production series with 517 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 517
- Diameter span
- 0.04–3.01 mm
- Coating
- Uncoated
What the catalogue commits to
Production capability
Min. diameter 0.15 mm
Catalogue reference
2026–2027 product catalogue, printed page P20. The full EDP table is available on request as a PDF.
Typical application
Deep holes in engineering plastics and non-ferrous metals.
Part numbers in DC326L
517 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC326L-0040 | Extended-length solid carbide drill | 0.04 | 0.7 | 3 | 38 | — | Standard |
| DC326L-0045 | Extended-length solid carbide drill | 0.045 | 0.7 | 3 | 38 | — | Standard |
| DC326L-0050 | Extended-length solid carbide drill | 0.05 | 0.9 | 3 | 38 | — | Standard |
| DC326L-0060 | Extended-length solid carbide drill | 0.06 | 0.9 | 3 | 38 | — | Standard |
| DC326L-0065 | Extended-length solid carbide drill | 0.065 | 1 | 3 | 38 | — | Standard |
| DC326L-0070 | Extended-length solid carbide drill | 0.07 | 1.2 | 3 | 38 | — | Standard |
| DC326L-0085 | Extended-length solid carbide drill | 0.085 | 1.5 | 3 | 38 | — | Standard |
| DC326L-0090-02 | Extended-length solid carbide drill | 0.09 | 1.2 | 3.175 | 38 | — | Standard |
| DC326L-0100Repeat order | Extended-length solid carbide drill | 0.1 | 3 | 3 | 38 | — | Standard |
| DC326L-0100-03 | Extended-length solid carbide drill | 0.1 | — | — | — | — | View full callout |
| DC326L-0110 | Extended-length solid carbide drill | 0.11 | 3 | 3 | 38 | — | Standard |
| DC326L-0120 | Extended-length solid carbide drill | 0.12 | 4 | 3 | 38 | — | Standard |
| DC326L-0130Repeat order | Extended-length solid carbide drill | 0.13 | 4 | 3 | 38 | — | Standard |
| DC326L-0130-02 | Extended-length solid carbide drill | 0.13 | — | — | — | — | View full callout |
| DC326L-0140 | Extended-length solid carbide drill | 0.14 | 4 | 3 | 38 | — | Standard |
| DC326L-0150 | Extended-length solid carbide drill | 0.15 | 5 | 3 | 38 | — | Standard |
| DC326L-0150-03 | Extended-length solid carbide drill | 0.15 | 3 | 3 | 38 | — | Standard |
| DC326L-0150-05 | Extended-length solid carbide drill | 0.15 | — | — | — | 118° | View full callout |
| DC326L-0160 | Extended-length solid carbide drill | 0.16 | 5 | 3 | 38 | — | Standard |
| DC326L-0166-01 | Extended-length solid carbide drill | 0.166 | — | — | — | 118° | View full callout |
| DC326L-0168-01 | Extended-length solid carbide drill | 0.168 | — | — | — | 118° | View full callout |
| DC326L-0168-02 | Extended-length solid carbide drill | 0.168 | — | — | — | — | View full callout |
| DC326L-0170 | Extended-length solid carbide drill | 0.17 | 5 | 3 | 38 | — | Standard |
| DC326L-0170-02 | Extended-length solid carbide drill | 0.17 | 4 | 3 | 38 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.