For process engineers
The table is a production record, not a sales range.
DC326L — Extended-length solid carbide drill
A real production series with 517 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 517
- Diameter span
- 0.04–3.01 mm
- Coating
- Uncoated
What the catalogue commits to
Production capability
Min. diameter 0.15 mm
Catalogue reference
2026–2027 product catalogue, printed page P20. The full EDP table is available on request as a PDF.
Typical application
Deep holes in engineering plastics and non-ferrous metals.
Part numbers in DC326L
517 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC326L-2900 | Extended-length solid carbide drill | 2.9 | 25 | 3 | 60 | — | Standard |
| DC326L-2900-01 | Extended-length solid carbide drill | 2.9 | 25 | 3 | 80 | — | Standard |
| DC326L-2910 | Extended-length solid carbide drill | 2.91 | 25 | 3 | 60 | — | Standard |
| DC326L-2920 | Extended-length solid carbide drill | 2.92 | 25 | 3 | 60 | — | Standard |
| DC326L-2930 | Extended-length solid carbide drill | 2.93 | 25 | 3 | 60 | — | Standard |
| DC326L-2940 | Extended-length solid carbide drill | 2.94 | 25 | 3 | 60 | — | Standard |
| DC326L-2950 | Extended-length solid carbide drill | 2.95 | 25 | 3 | 60 | — | Standard |
| DC326L-2960 | Extended-length solid carbide drill | 2.96 | 25 | 3 | 60 | — | Standard |
| DC326L-2970 | Extended-length solid carbide drill | 2.97 | 25 | 3 | 60 | — | Standard |
| DC326L-2980 | Extended-length solid carbide drill | 2.98 | 25 | 3 | 60 | — | Standard |
| DC326L-2990 | Extended-length solid carbide drill | 2.99 | 25 | 3 | 60 | — | Standard |
| DC326L-3000Repeat order | Extended-length solid carbide drill | 3 | 25 | 3 | 60 | — | Standard |
| DC326L-3010 | Extended-length solid carbide drill | 3.01 | 12 | 3.175 | 50 | 118° | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.