For process engineers
The table is a production record, not a sales range.
DC936 — Bronze-coated coolant-through solid carbide drill
A real production series with 53 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 53
- Diameter span
- 0.72–17.2 mm
- Coating
- Bronze
What the catalogue commits to
Production capability
Min. diameter 3.00 mm
Catalogue reference
2026–2027 product catalogue, printed page P47. The full EDP table is available on request as a PDF.
Typical application
Coolant-through drilling for deep holes in difficult alloys.
Part numbers in DC936
53 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC936-0720-06-01 | DLC-coated coolant-through solid carbide drill | 0.72 | — | — | — | — | View full callout |
| DC936-0950-03-01 | Bronze-coated coolant-through solid carbide drill | 0.95 | 8 | 3 | 50 | 135° | Standard |
| DC936-10000-03-01 | Bronze-coated coolant-through solid carbide drill | 10 | 80 | 10 | 120 | — | Standard |
| DC936-1020-04 | Black-coated coolant-through solid carbide drill | 1.02 | 13 | 4 | 50 | — | Standard |
| DC936-1020-06-01 | DLC-coated coolant-through solid carbide drill | 1.02 | — | — | — | — | View full callout |
| DC936-1030-06-01 | DLC-coated coolant-through solid carbide drill | 1.03 | — | — | — | — | View full callout |
| DC936-10700-04 | Bronze-coated coolant-through solid carbide drill | 10.7 | 55 | 12 | 102 | — | Standard |
| DC936-11300-03-01 | Bronze-coated coolant-through solid carbide drill | 11.3 | 55 | 12 | 102 | — | Standard |
| DC936-1330-06-01 | DLC-coated coolant-through solid carbide drill | 1.33 | 12 | 4 | 50 | 130° | Standard |
| DC936-14800-03-01 | Bronze-coated coolant-through solid carbide drill | 14.8 | 65 | 16 | 115 | — | Standard |
| DC936-16500-03 | Bronze-coated coolant-through three-flute solid carbide drill | 16.5 | — | — | — | — | View full callout |
| DC936-17200-03 | Bronze-coated coolant-through solid carbide drill | 17.2 | 93 | 18 | 143 | — | Standard |
| DC936-1730-06-01 | DLC-coated coolant-through solid carbide drill | 1.73 | 12 | 4 | 50 | 130° | Standard |
| DC936-1800-04-01 | Black-coated coolant-through solid carbide drill | 1.8 | — | — | — | 135° | View full callout |
| DC936-1800-04-02 | Black-coated coolant-through flat-bottom solid carbide drill | 1.8 | — | — | — | 180° | View full callout |
| DC936-2000-03-07 | Bronze-coated coolant-through solid carbide drill | 2 | — | — | — | 145° | View full callout |
| DC936-2000-04-01 | Black-coated coolant-through solid carbide drill | 2 | — | — | — | 145° | View full callout |
| DC936-2000-04-02 | Black-coated coolant-through solid carbide drill | 2 | 16 | 4 | 50 | 135° | Standard |
| DC936-2000-04-03 | Black-coated coolant-through solid carbide drill | 2 | 36 | 4 | 75 | — | Standard |
| DC936-2100-03-01 | Bronze-coated coolant-through solid carbide drill | 2.1 | 24 | 3 | 63 | 140° | Standard |
| DC936-2100-03-03 | Black-coated coolant-through solid carbide drill | 2.1 | 20 | 3 | 50 | 135° | Standard |
| DC936-2100-04-01 | Black-coated coolant-through solid carbide drill | 2.1 | — | — | — | 145° | View full callout |
| DC936-2100-04-02 | Black-coated coolant-through solid carbide drill | 2.1 | 20 | 4 | 50 | 135° | Standard |
| DC936-2200-03-01 | Bronze-coated coolant-through flat-bottom solid carbide drill | 2.2 | 15 | 4 | 50 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.