For process engineers
The table is a production record, not a sales range.
DC936 — Bronze-coated coolant-through solid carbide drill
A real production series with 53 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 53
- Diameter span
- 0.72–17.2 mm
- Coating
- Bronze
What the catalogue commits to
Production capability
Min. diameter 3.00 mm
Catalogue reference
2026–2027 product catalogue, printed page P47. The full EDP table is available on request as a PDF.
Typical application
Coolant-through drilling for deep holes in difficult alloys.
Part numbers in DC936
53 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC936-8800-03-02 | Bronze-coated coolant-through solid carbide drill | 8.8 | 66 | 10 | 103 | — | Standard |
| DC936-8800-03-03 | Bronze-coated coolant-through solid carbide drill | 8.8 | 61 | 10 | 103 | — | Standard |
| DC936-9400-03 | Bronze-coated coolant-through solid carbide drill | 9.4 | 61 | 10 | 103 | — | Standard |
| DC936-9400-03-01 | Bronze-coated coolant-through solid carbide drill | 9.4 | 66 | 10 | 103 | — | Standard |
| DC936-9400-04 | Bronze-coated coolant-through solid carbide drill | 16.5 | 73 | 18 | 123 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.