DCS0769 — Step HSS drill

A real production series with 1 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.

Precision cutting-tool production line, general category reference — General reference illustration — not a photograph of a specific part number or product, and not plant documentation. Dimensions, not images, define a specification.

Part numbers in series: 1
Diameter span: 2–2 mm
Coating: Uncoated

Part numbers in DCS0769

1 part numbersFilter this series further

DCS0769 standard part numbers
Part no.	Description	D1 mm	Flute mm	Shank mm	OAL mm	Point	Geometry
DCS0769-001	Step HSS drill	2	—	—	—	120°	View full callout

How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.

Special and custom geometryCompare other series in this family.Feeds and speedsStarting spindle speed and feed by material.Request a quoteAsk for a diameter outside the standard table.