For process engineers
The table is a production record, not a sales range.
DP — Solid carbide insert / blade
A real production series with 34 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 34
- Diameter span
- 3–3 mm
- Coating
- Uncoated
Part numbers in DP
34 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DP-001Repeat order | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-002Repeat order | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-004 | Solid carbide insert / blade | — | — | — | — | 3° | View full callout |
| DP-005 | Solid carbide cutting tool | — | — | — | — | — | View full callout |
| DP-006 | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-008 | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-009 | Solid carbide insert / blade | — | — | — | — | 5° | View full callout |
| DP-010 | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-011 | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-014 | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-015 | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-016 | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-017 | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-018 | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-019 | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-020 | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-022 | Solid carbide cutting tool | — | — | — | — | — | View full callout |
| DP-025 | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-026 | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-027 | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-029 | Solid carbide insert / blade | — | — | — | — | 16° | View full callout |
| DP-031 | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-032 | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-033 | Solid carbide insert / blade | — | — | — | — | 140° | View full callout |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.