For process engineers
The table is a production record, not a sales range.
DP — Solid carbide insert / blade
A real production series with 34 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 34
- Diameter span
- 3–3 mm
- Coating
- Uncoated
Part numbers in DP
34 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DP-034 | Solid carbide insert / blade | — | — | — | — | 117° | View full callout |
| DP-035 | Solid carbide insert / blade | — | — | — | — | 103° | View full callout |
| DP-036 | Solid carbide insert / blade | — | — | — | — | 112° | View full callout |
| DP-038 | Solid carbide insert / blade | — | — | — | — | 112° | View full callout |
| DP-039 | Solid carbide insert / blade | — | — | — | — | 135° | View full callout |
| DP-040 | Solid carbide insert / blade | — | — | — | — | 135° | View full callout |
| DP-041 | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-042 | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-045 | Solid carbide insert / blade | — | — | — | — | — | View full callout |
| DP-3000 | Solid carbide cutting tool | 3 | — | — | — | — | View full callout |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.