For process engineers
The table is a production record, not a sales range.
EC326 — Flat-bottom for aluminium solid carbide end mill
A real production series with 114 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 114
- Diameter span
- 0.15–16 mm
- Coating
- Uncoated
Part numbers in EC326
114 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| EC326-0040-01 | Flat-bottom for aluminium solid carbide end mill | 0.4 | — | — | — | — | View full callout |
| EC326-0150-01 | Flat-bottom solid carbide end mill | 0.15 | — | — | — | — | View full callout |
| EC326-0200-01 | Flat-bottom for aluminium solid carbide end mill | 0.2 | — | — | — | — | View full callout |
| EC326-0200-02 | Flat-bottom for aluminium solid carbide end mill | 0.2 | — | — | — | — | View full callout |
| EC326-0200-03 | Flat-bottom solid carbide end mill | 0.2 | — | — | — | — | View full callout |
| EC326-0200-04 | Flat-bottom for aluminium solid carbide end mill | 0.2 | — | — | — | — | View full callout |
| EC326-0241 | Flat-bottom for aluminium solid carbide end mill | 0.241 | — | — | — | — | View full callout |
| EC326-0300-01 | Flat-bottom for aluminium solid carbide end mill | 0.3 | 1.3 | 3.175 | 38 | — | Standard |
| EC326-0300-04 | Solid carbide end mill | 0.3 | — | — | — | — | View full callout |
| EC326-0300-05 | Solid carbide end mill | 0.3 | — | — | — | — | View full callout |
| EC326-0300-06 | Flat-bottom for aluminium solid carbide end mill | 0.3 | — | — | — | — | View full callout |
| EC326-0300-11 | Flat-bottom for aluminium solid carbide end mill | 0.3 | — | — | — | — | View full callout |
| EC326-0400 | Solid carbide end mill | 0.4 | — | — | — | — | View full callout |
| EC326-0400-03 | Flat-bottom for aluminium solid carbide end mill | 0.4 | — | — | — | — | View full callout |
| EC326-0400-05 | Flat-bottom for aluminium solid carbide end mill | 0.4 | — | — | — | — | View full callout |
| EC326-0400-06Repeat order | Flat-bottom solid carbide end mill | 0.4 | — | — | — | — | View full callout |
| EC326-0400-07 | Flat-bottom solid carbide end mill | 0.4 | — | — | — | — | View full callout |
| EC326-0400-09Repeat order | Flat-bottom for aluminium solid carbide end mill | 0.4 | — | — | — | — | View full callout |
| EC326-0400-10 | Flat-bottom for aluminium solid carbide end mill | 0.4 | — | — | — | — | View full callout |
| EC326-0400-11 | Flat-bottom solid carbide end mill | 0.4 | — | — | — | — | View full callout |
| EC326-0500-01 | Flat-bottom for aluminium solid carbide end mill | 0.5 | — | — | — | — | View full callout |
| EC326-0500-05 | Solid carbide engraving cutter | 0.5 | — | — | — | — | View full callout |
| EC326-0500-08 | Flat-bottom for aluminium solid carbide end mill | 0.5 | — | — | — | — | View full callout |
| EC326-0500-09 | Flat-bottom for aluminium solid carbide end mill | 0.5 | — | — | — | — | View full callout |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.