For process engineers
The table is a production record, not a sales range.
EC326 — Flat-bottom for aluminium solid carbide end mill
A real production series with 114 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 114
- Diameter span
- 0.15–16 mm
- Coating
- Uncoated
Part numbers in EC326
114 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| EC326-2000-16 | Flat-bottom for aluminium solid carbide end mill | 2 | — | — | — | — | View full callout |
| EC326-2000-20 | Flat-bottom solid carbide end mill | 2 | — | — | — | — | View full callout |
| EC326-2000-26 | Flat-bottom for aluminium solid carbide end mill | 2 | — | — | — | — | View full callout |
| EC326-2500-03 | Solid carbide end mill | 2.5 | — | — | — | — | View full callout |
| EC326-2500-04 | Solid carbide end mill | 2.5 | — | — | — | — | View full callout |
| EC326-2500-05 | Flat-bottom solid carbide end mill | 2.5 | — | — | — | — | View full callout |
| EC326-2500-07 | Flat-bottom solid carbide end mill | 2.5 | — | — | — | — | View full callout |
| EC326-2500-08 | Flat-bottom solid carbide end mill | 2.5 | — | — | — | — | View full callout |
| EC326-3000-06 | Flat-bottom for aluminium solid carbide end mill | 3 | — | — | — | — | View full callout |
| EC326-3000-09 | Solid carbide end mill | 3 | — | — | — | — | View full callout |
| EC326-3000-11 | Flat-bottom for aluminium solid carbide end mill | 3 | — | — | — | — | View full callout |
| EC326-3175-02 | Solid carbide end mill | 3.175 | — | — | — | — | View full callout |
| EC326-3175-03 | Solid carbide end mill | 3.175 | — | — | — | — | View full callout |
| EC326-4000-01 | Flat-bottom for aluminium solid carbide end mill | 4 | — | — | — | — | View full callout |
| EC326-4000-06 | Flat-bottom for aluminium solid carbide end mill | 4 | — | — | — | — | View full callout |
| EC326-4000-07 | Solid carbide end mill | 4 | — | — | — | — | View full callout |
| EC326-8000-05 | Flat-bottom for aluminium solid carbide end mill | 8 | — | — | — | — | View full callout |
| EC326-8000-06 | Flat-bottom for aluminium solid carbide end mill | 8 | — | — | — | — | View full callout |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.