For process engineers
The table is a production record, not a sales range.
EC336 — DLC-coated flat-bottom solid carbide end mill
A real production series with 45 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 45
- Diameter span
- 0.05–4 mm
- Coating
- DLC
Part numbers in EC336
45 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| EC336-0050 | Coated solid carbide end mill | 0.05 | — | — | — | — | View full callout |
| EC336-0080-06-01 | DLC-coated flat-bottom solid carbide end mill | 0.08 | — | — | — | — | View full callout |
| EC336-0100-06-01 | DLC-coated flat-bottom for aluminium solid carbide end mill | 0.1 | — | — | — | — | View full callout |
| EC336-0100-06-02 | DLC-coated flat-bottom for aluminium solid carbide end mill | 0.1 | — | — | — | — | View full callout |
| EC336-0120-06 | DLC-coated solid carbide end mill | 0.12 | — | — | — | — | View full callout |
| EC336-0130-06 | DLC-coated solid carbide end mill | 0.13 | — | — | — | — | View full callout |
| EC336-0150-06 | DLC-coated flat-bottom for aluminium solid carbide end mill | 0.15 | — | — | — | — | View full callout |
| EC336-0150-06-01 | DLC-coated flat-bottom solid carbide end mill | 0.15 | — | — | — | — | View full callout |
| EC336-0200-06-01 | DLC-coated flat-bottom solid carbide end mill | 0.2 | — | — | — | — | View full callout |
| EC336-0200-06-02 | DLC-coated flat-bottom solid carbide end mill | 0.2 | — | — | — | — | View full callout |
| EC336-0200-06-04 | DLC-coated flat-bottom solid carbide end mill | 0.2 | — | — | — | — | View full callout |
| EC336-0240-06-01 | DLC-coated solid carbide end mill | 0.24 | — | — | — | — | View full callout |
| EC336-0241-06-01 | DLC-coated flat-bottom for aluminium solid carbide end mill | 0.241 | — | — | — | — | View full callout |
| EC336-0250-06-01 | DLC-coated flat-bottom solid carbide end mill | 0.25 | — | — | — | — | View full callout |
| EC336-0250-06-02 | DLC-coated flat-bottom solid carbide end mill | 0.25 | — | — | — | — | View full callout |
| EC336-0290-06 | DLC-coated flat-bottom solid carbide end mill | 0.29 | — | — | — | — | View full callout |
| EC336-0300-06-04 | DLC-coated flat-bottom solid carbide end mill | 0.3 | — | — | — | — | View full callout |
| EC336-0320-06Repeat order | DLC-coated flat-bottom solid carbide end mill | 0.32 | — | — | — | — | View full callout |
| EC336-0400-06-01 | DLC-coated flat-bottom solid carbide end mill | 0.4 | — | — | — | — | View full callout |
| EC336-0450-06-01 | DLC-coated flat-bottom solid carbide end mill | 0.45 | — | — | — | — | View full callout |
| EC336-0500-06-01Repeat order | DLC-coated flat-bottom solid carbide end mill | 0.5 | — | — | — | — | View full callout |
| EC336-0500-06-02 | DLC-coated flat-bottom solid carbide end mill | 0.5 | — | — | — | — | View full callout |
| EC336-0600-06-01 | DLC-coated flat-bottom for aluminium solid carbide end mill | 0.6 | — | — | — | — | View full callout |
| EC336-0650-06-01 | DLC-coated flat-bottom solid carbide end mill | 0.65 | — | — | — | — | View full callout |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.