For process engineers
The table is a production record, not a sales range.
EC336 — DLC-coated flat-bottom solid carbide end mill
A real production series with 45 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 45
- Diameter span
- 0.05–4 mm
- Coating
- DLC
Part numbers in EC336
45 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| EC336-0700-06 | DLC-coated flat-bottom for aluminium solid carbide end mill | 0.7 | — | — | — | — | View full callout |
| EC336-0770-06-01 | DLC-coated flat-bottom for aluminium solid carbide end mill | 0.77 | — | — | — | — | View full callout |
| EC336-0800-02 | Black-coated flat-bottom solid carbide end mill | 0.8 | — | — | — | — | View full callout |
| EC336-0800-06 | DLC-coated flat-bottom solid carbide end mill | 0.8 | — | — | — | — | View full callout |
| EC336-0800-06-01 | DLC-coated flat-bottom solid carbide end mill | 0.8 | — | — | — | — | View full callout |
| EC336-0800-06-03 | DLC-coated flat-bottom solid carbide end mill | 0.8 | — | — | — | — | View full callout |
| EC336-0970-06-01 | DLC-coated flat-bottom for aluminium solid carbide end mill | 0.97 | — | — | — | — | View full callout |
| EC336-1000-06 | DLC-coated flat-bottom for aluminium solid carbide end mill | 1 | — | — | — | — | View full callout |
| EC336-1000-06-01 | DLC-coated flat-bottom solid carbide end mill | 1 | — | — | — | — | View full callout |
| EC336-1000-06-02 | DLC-coated flat-bottom solid carbide end mill | 1 | — | — | — | — | View full callout |
| EC336-1000-06-03 | DLC-coated flat-bottom solid carbide end mill | 1 | — | — | — | — | View full callout |
| EC336-1000-06-06 | DLC-coated solid carbide engraving cutter | 1 | — | — | — | — | View full callout |
| EC336-1200-06-01 | DLC-coated flat-bottom solid carbide end mill | 1.2 | — | — | — | — | View full callout |
| EC336-1350-06-01 | DLC-coated solid carbide end mill | 1.35 | — | — | — | — | View full callout |
| EC336-1500-06-02 | DLC-coated flat-bottom solid carbide end mill | 1.5 | — | — | — | — | View full callout |
| EC336-1500-06-03 | DLC-coated flat-bottom solid carbide end mill | 1.5 | — | — | — | — | View full callout |
| EC336-1500-06-04 | DLC-coated flat-bottom solid carbide end mill | 1.5 | — | — | — | — | View full callout |
| EC336-1500-06-05 | DLC-coated flat-bottom for aluminium solid carbide end mill | 1.5 | 4.5 | 4 | 50 | — | Standard |
| EC336-1800-06-01 | DLC-coated flat-bottom solid carbide end mill | 1.8 | — | — | — | — | View full callout |
| EC336-4000-06 | DLC-coated flat-bottom for aluminium solid carbide end mill | 4 | — | — | — | — | View full callout |
| EC336-4000-06-01 | DLC-coated flat-bottom for aluminium solid carbide end mill | 4 | — | — | — | — | View full callout |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.