HDC336L — Black-coated solid carbide drill (not for shrink-fit holders)

A real production series with 3 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.

Precision cutting-tool production line, general category reference — General reference illustration — not a photograph of a specific part number or product, and not plant documentation. Dimensions, not images, define a specification.

Part numbers in series: 3
Diameter span: 0.15–0.25 mm
Coating: Black

Part numbers in HDC336L

3 part numbersFilter this series further

HDC336L standard part numbers
Part no.	Description	D1 mm	Flute mm	Shank mm	OAL mm	Point	Geometry
HDC336L-0150-03-01	Bronze-coated solid carbide drill (not for shrink-fit holders)	0.15	2.5	3	38	—	Standard
HDC336L-0200-04-01	Black-coated solid carbide drill (not for shrink-fit holders)	0.2	4	3	38	—	Standard
HDC336L-0250-04-02	Black-coated solid carbide drill (not for shrink-fit holders)	0.25	4.5	3	38	—	Standard

How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.

Micro drillsCompare other series in this family.Feeds and speedsStarting spindle speed and feed by material.Request a quoteAsk for a diameter outside the standard table.