For process engineers
The table is a production record, not a sales range.
HEC — Solid carbide engraving cutter (not for shrink-fit holders)
A real production series with 6 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 6
- Diameter span
- 0.5–1.05 mm
- Coating
- Uncoated
Part numbers in HEC
6 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| HEC-326-0500Repeat order | Solid carbide engraving cutter (not for shrink-fit holders) | 0.5 | — | — | — | — | View full callout |
| HEC-326-0500-01 | Solid carbide engraving cutter (not for shrink-fit holders) | 0.5 | — | — | — | — | View full callout |
| HEC-326-0550 | Solid carbide engraving cutter (not for shrink-fit holders) | 0.55 | — | — | — | — | View full callout |
| HEC-326-1000Repeat order | Solid carbide engraving cutter (not for shrink-fit holders) | 1 | — | — | — | — | View full callout |
| HEC-326-1050 | Solid carbide engraving cutter (not for shrink-fit holders) | 1.05 | — | — | — | — | View full callout |
| HEC-336-1000-06-01 | DLC-coated solid carbide engraving cutter (not for shrink-fit holders) | 1 | — | — | — | — | View full callout |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.