For machine operators
Check the shank and flute length before you load it.
HEC-326-1050
Solid carbide engraving cutter (not for shrink-fit holders) — D1.05*7*3.175*38*2F.
- Cutting diameter D1
- 1.05 mm
- Series
- HEC
- Coating
- Uncoated
Recorded geometry
NO DIMENSION VECTOR PUBLISHED
This part number carries a stepped, multi-diameter or otherwise custom callout. The string below is reproduced verbatim from the grinding record; we do not draw a shape that the record does not define. Ask for the dimensioned drawing before ordering.
D1.05*7*3.175*38*2F
D1.05*7*3.175*38*2F
Cutting diameter D1
1.05 mm
Flute length
—
Shank diameter
—
Overall length
—
Point angle
—
Substrate
Solid carbide
Coating
Uncoated
Helix hand
Right-hand
Length class
Standard
Non-standard geometry. This part number carries a stepped, multi-diameter or otherwise custom callout. The string above is reproduced verbatim from the grinding record; ask for the dimensioned drawing before ordering.
Dimensions are the geometry held on this part number. Confirm the tolerance and inspection method for your application in the written quotation. Starting cutting data is on the feeds and speeds page.
Need this geometry in a different coating?
Quote the part number and the material. We reply with a written specification and a sample date.
Other diameters in HEC
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| HEC-326-0500Repeat order | Solid carbide engraving cutter (not for shrink-fit holders) | 0.5 | — | — | — | — | View full callout |
| HEC-326-0500-01 | Solid carbide engraving cutter (not for shrink-fit holders) | 0.5 | — | — | — | — | View full callout |
| HEC-326-0550 | Solid carbide engraving cutter (not for shrink-fit holders) | 0.55 | — | — | — | — | View full callout |
| HEC-326-1000Repeat order | Solid carbide engraving cutter (not for shrink-fit holders) | 1 | — | — | — | — | View full callout |
| HEC-336-1000-06-01 | DLC-coated solid carbide engraving cutter (not for shrink-fit holders) | 1 | — | — | — | — | View full callout |
| HEC-326-1050 | Solid carbide engraving cutter (not for shrink-fit holders) | 1.05 | — | — | — | — | View full callout |