For process engineers
The table is a production record, not a sales range.
JP — Coated solid carbide saw blade
A real production series with 3 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 3
- Diameter span
- 15–25 mm
- Coating
- Coated
Part numbers in JP
3 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| JP-003 | Coated solid carbide saw blade | 25 | — | — | — | — | View full callout |
| JP-004 | Coated solid carbide saw blade | 15 | — | — | — | — | View full callout |
| JP-005 | Solid carbide saw blade | 25 | — | — | — | — | View full callout |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.