For process engineers
The table is a production record, not a sales range.
KTP28L — Solid carbide cutting tool
A real production series with 4 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 4
- Diameter span
- 1–1.5 mm
- Coating
- Uncoated
Part numbers in KTP28L
4 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| KTP28L-1000 | Solid carbide cutting tool | 1 | — | — | — | — | View full callout |
| KTP28L-1200Repeat order | Solid carbide cutting tool | 1.2 | — | — | — | — | View full callout |
| KTP28L-1500 | Solid carbide cutting tool | 1.5 | — | — | — | — | View full callout |
| KTP28L-1500-02 | Solid carbide cutting tool | 1.5 | — | — | — | — | View full callout |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.