ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION
Cutting diameter · 2.11 mm

Carbide tools, 2.11 mm

10 catalogue part numbers at this diameter, across 7 grinding series and 3 coatings. Every record carries its own flute, shank, overall length and geometry callout.

Diameter2.11mm
Part numbers10at this size
Series7in range
Coatings3available

01Part numbers at 2.11 mm

10 on record
Part numberDescriptionSeries Coating Flute (mm)Shank (mm)OAL (mm) Geometry
HDCS636-0034TiN-coated left-hand step solid carbide drillHDCS636TiN———D2.113+1.025*1.8
HDC636-2110-01TiN-coated left-hand solid carbide drillHDC636TiN123.238D2.11*12*3.2*38*118°
DC426-2110-04Black-coated solid carbide drillDC426black12338D2.11*12*3*38
HDC326-2110Solid carbide drill (not for shrink-fit holders)HDC326uncoated4.5338D2.11*4.5*3*38*110°
DC426L-2110-04-01Black-coated extended-length solid carbide drillDC426Lblack25360D2.11*25*3*60
HDC326-2107-01Solid carbide drill (not for shrink-fit holders)HDC326uncoated4.5338D2.107*4.5*3*38*110°
DC326-2110Solid carbide drillDC326uncoated12338D2.11*12*3*38
DC326L-2110Extended-length solid carbide drillDC326Luncoated25360D2.11*25*3*60
HDCS636-2255TiN-coated left-hand step solid carbide drillHDCS636TiN———D2.113*1.20*118°+2.50*3*90°*3.2*38
HDCS636-2568TiN-coated left-hand step solid carbide drillHDCS636TiN———D2.113*1.17*118°+2.50*3*90°*3.2*38

All 10 part numbers at this diameter, with the geometry string as recorded.

02Grinding series using this diameter

7 series

Open a series page for its tolerance, capability note and full part matrix.

03Coatings available at this diameter

3 options
TiN
4 part numbers
At 2.11 mm
black
2 part numbers
At 2.11 mm
uncoated
4 part numbers
At 2.11 mm

04Neighbouring diameters

Step to the next size