ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION
Micro drills · series HDC326

HDC326 — Solid carbide drill (not for shrink-fit holders)

507 catalogue part numbers, measured diameters from 0.03 to 4.1 mm, primary coating uncoated.

Diameter range0.03–4.1mm
CoatinguncoatedPrimary coating
Part numbers507on record
Catalogue page—

01Series specification

From the catalogue series record
Series codeHDC326
DescriptionSolid carbide drill (not for shrink-fit holders)
Tooling familyMicro drills
Capability—
Tolerance—
Catalogue diameter range—
Measured diameter0.03–4.1 mm
Primary coatinguncoated
Application—
Catalogue page—
Part numbers on record507

02Part number matrix

507 records
Part numberDescriptionDiameter Flute (mm)Shank (mm)OAL (mm) PointCoatingGeometry
HDC326-1550-03Solid carbide drill (not for shrink-fit holders)1.55123.1738118.0°uncoatedD1.55*12*3.175*38*118°
HDC326-1250-08Solid carbide drill (not for shrink-fit holders)1.25123.1738118.0°uncoatedD1.25*12*3.175*38*118°
HDC326-0250-15Solid carbide drill (not for shrink-fit holders)0.257.53.1738118.0°uncoatedD0.25*7.5*3.175*38*118°
HDC326-0500-02Solid carbide drill (not for shrink-fit holders)0.543.1738118.0°uncoatedD0.50*4*3.175*38*118°
HDC326-0500-04Solid carbide drill (not for shrink-fit holders)0.553.1738118.0°uncoatedD0.50*5*3.175*38*118°
HDC326-0328-02Solid carbide drill (not for shrink-fit holders)0.336.53.1738118.0°uncoatedD0.328*6.5*3.175*38*118°
HDC326-0325-03Solid carbide drill (not for shrink-fit holders)0.335.53.1738118.0°uncoatedD0.325*5.5*3.175*38*118°
HDC326-1080-06Solid carbide drill (not for shrink-fit holders)1.08123.1738118.0°uncoatedD1.08*12*3.175*38*118°
HDC326-1280-04Solid carbide drill (not for shrink-fit holders)1.2810338118.0°uncoatedD1.28*10*3*38*118°
HDC326-1500-03Solid carbide drill (not for shrink-fit holders)1.58338118.0°uncoatedD1.50*8*3*38*118°
HDC326-0970-02Solid carbide drill (not for shrink-fit holders)0.975338118.0°uncoatedD0.97*5*3*38*118°
HDC326-1650-05Solid carbide drill (not for shrink-fit holders)1.6510338118.0°uncoatedD1.65*10*3*38*118°
HDC326-1030-02Solid carbide drill (not for shrink-fit holders)1.03103.1738118.0°uncoatedD1.03*10*3.175*38*118°
HDC326-0690-03Solid carbide drill (not for shrink-fit holders)0.69————uncoatedD0.69*5+1*2(避空)*3.175*38
HDC326-0400-11Solid carbide drill (not for shrink-fit holders)0.4———118.0°uncoatedD0.40*4.5+1*2(避空)*3.175*38*118°
HDC326-0605Solid carbide drill (not for shrink-fit holders)0.663.1738118.0°uncoatedD0.605*6*3.175*38*118°
HDC326-0400-09Solid carbide drill (not for shrink-fit holders)0.410.53.1738118.0°uncoatedD0.40*10.5*3.175*38*118°
HDC326-0390-05Solid carbide drill (not for shrink-fit holders)0.39———118.0°uncoatedD0.39*4+1*2.5*3.175*38*118°
HDC326-1080-02Solid carbide drill (not for shrink-fit holders)1.088338118.0°uncoatedD1.08*8*3*38*118°
HDC326-1430-02Solid carbide drill (not for shrink-fit holders)1.4310338118.0°uncoatedD1.43*10*3*38*118°
HDC326-0590-04Solid carbide drill (not for shrink-fit holders)0.59————uncoatedD0.59*5+1*2(避空)*3.175*38
HDC326-0300-01Solid carbide drill (not for shrink-fit holders)0.32.53.1738118.0°uncoatedD0.30*2.5*3.175*38*118°
HDC326-0210-04Solid carbide drill (not for shrink-fit holders)0.21———110.0°uncoatedD0.21*2+3(避空)+4(斜位)*3.175*26*110°
HDC326-0280-10Solid carbide drill (not for shrink-fit holders)0.28———110.0°uncoatedD0.28*2+3(避空)+4(斜位)*3.175*26*110°
HDC326-0800-03Solid carbide drill (not for shrink-fit holders)0.85.53.1738118.0°uncoatedD0.80*5.5*3.175*38*118°
HDC326-0210-05Solid carbide drill (not for shrink-fit holders)0.21———100.0°uncoatedD0.21*2+3(避空)+4(斜位)*3.175*26*100°
HDC326-0280-11Solid carbide drill (not for shrink-fit holders)0.28———100.0°uncoatedD0.28*2+3(避空)+4(斜位)*3.175*26*100°
HDC326-0460-02Solid carbide drill (not for shrink-fit holders)0.466338118.0°uncoatedD0.46*6*3*38*118°
HDC326-0250-12Solid carbide drill (not for shrink-fit holders)0.255.53.1738118.0°uncoatedD0.25*5.5*3.175*38*118°
HDC326-0650-07Solid carbide drill (not for shrink-fit holders)0.659.53.1738118.0°uncoatedD0.65*9.5*3.175*38*118°
HDC326-0190-09Solid carbide drill (not for shrink-fit holders)0.19————uncoatedD0.19*1.5+0.3*4(避空)*3.175*38
HDC326-0420-04Solid carbide drill (not for shrink-fit holders)0.4210.53.1738118.0°uncoatedD0.42*10.5*3.175*38*118°
HDC326-0600-04Solid carbide drill (not for shrink-fit holders)0.63338118.0°uncoatedD0.60*3*3*38*118°
HDC326-0800-04Solid carbide drill (not for shrink-fit holders)0.85338118.0°uncoatedD0.80*5*3*38*118°
HDC326-0620-05Solid carbide drill (not for shrink-fit holders)0.6283.1738118.0°uncoatedD0.62*8*3.175*38*118°
HDC326-0440-02Solid carbide drill (not for shrink-fit holders)0.44———118.0°uncoatedD0.44*4.5+1*2(避空)*3.175*38*118°
HDC326-0620-04Solid carbide drill (not for shrink-fit holders)0.6273.1738118.0°uncoatedD0.62*7*3.175*38*118°
HDC326-0900-02Solid carbide drill (not for shrink-fit holders)0.95338118.0°uncoatedD0.90*5*3*38*118°
HDC326-0250-08Solid carbide drill (not for shrink-fit holders)0.2543.1738118.0°uncoatedD0.25*4*3.175*38*118°
HDC326-1090-02Solid carbide drill (not for shrink-fit holders)1.0910338118.0°uncoatedD1.09*10*3*38*118°

Showing 40 of 507 part numbers in this series. Flute, shank and overall length are catalogue values; the geometry string is reproduced verbatim, including multi-diameter callouts.

03Coatings & geometry

1 coatings on record
uncoated
507 part numbers
In HDC326
Geometry callouts in this series
  • D1.55*12*3.175*38*118° · HDC326-1550-03
  • D1.25*12*3.175*38*118° · HDC326-1250-08
  • D0.25*7.5*3.175*38*118° · HDC326-0250-15
  • D0.50*4*3.175*38*118° · HDC326-0500-02

04Frequently asked questions

What diameter range does this series cover?

The catalogue records a measured range of 0.03–4.1 mm for HDC326. Individual diameters are listed in the part matrix above.

Which coatings are available on this series?

The primary coating recorded for the series is uncoated. Across the 507 part numbers on record, the coatings shown in section 03 are the ones actually assigned to those records.

Where does this series sit in the catalogue?

HDC326 is listed on catalogue page —. Its capability note is: —. Use the part number or the full geometry string when enquiring.

05Adjacent series

Micro drills

Other series in the same tooling family. Each opens its own specification and part matrix.

Back to all series