ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION

Choosing a grit sequence for metal finishing

18 finishing families cover 24# to 5000#. The sequence depends on the defect, the alloy and whether the surface is flat or contoured.

2 min read 218 words Updated 2026-11-06

General metal finishing is not one product. Our range has 18 families, from ceramic and zirconia belts to non-woven pads and bonded wheels, spanning 24# to 5000#.

Pick the abrasive by the job

FamilyGritBest at
Ceramic abrasive belt24# - 1200#Strong cut on stainless, titanium and tungsten alloys
Zirconia alumina belt24# - 120#Heavy-duty grinding and heat-resistant alloys
Silicon carbide belt24# - 1200#Non-ferrous and non-metallic surfaces, steel brushing
Agglomerated abrasive belt80# - 1000#Consistent finish on stainless and high-alloy steel
Diamond abrasive belt60# - 3000#Carbide, ceramics and glass
Non-woven pad180# - 1000#Cool cleaning without damaging the workpiece
Abrasive sponge60# - 1500#Curves, radii and recesses
Bonded grinding wheelOn requestMachine shop and die dressing

Sequence, not single grit

Start with the grit that removes the defect, then step up until the scratch pattern is acceptable. Skipping too many grades leaves deep scratches that the fine grade cannot remove; adding too many wastes time and heat-treats the surface.

For contoured parts, a soft cloth belt, a nylon wheel or an abrasive sponge conforms better than a rigid bonded wheel. For flat stainless sheet, a ceramic or agglomerated belt gives a repeatable pattern.

Send the alloy, the current scratch pattern and the finish you need. We return a grit sequence and a sample plan, not a single product code.

Width, core and bond are configured to the machine, so the machine model belongs in the enquiry.

Data behind the text

Dimensions and part numbers referenced here come from the TONNY production catalogue. Open the series or diameter index to check a specific record before ordering.

Browse series   Diameter index