For machine operators
Check the shank and flute length before you load it.
EC326-1200-08
Solid carbide end mill — D1.20*7*3.175*50.
- Cutting diameter D1
- 1.2 mm
- Series
- EC326
- Coating
- Uncoated
Recorded geometry
D1.20*7*3.175*50
Cutting diameter D1
1.2 mm
Flute length
7 mm
Shank diameter
3.175 mm
Overall length
50 mm
Point angle
—
Substrate
Solid carbide
Coating
Uncoated
Helix hand
Right-hand
Length class
Standard
Dimensions are the geometry held on this part number. Confirm the tolerance and inspection method for your application in the written quotation. Starting cutting data is on the feeds and speeds page.
Need this geometry in a different coating?
Quote the part number and the material. We reply with a written specification and a sample date.
Other diameters in EC326
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| EC326-0150-01 | Flat-bottom solid carbide end mill | 0.15 | — | — | — | — | View full callout |
| EC326-0200-01 | Flat-bottom for aluminium solid carbide end mill | 0.2 | — | — | — | — | View full callout |
| EC326-0200-02 | Flat-bottom for aluminium solid carbide end mill | 0.2 | — | — | — | — | View full callout |
| EC326-0200-03 | Flat-bottom solid carbide end mill | 0.2 | — | — | — | — | View full callout |
| EC326-0200-04 | Flat-bottom for aluminium solid carbide end mill | 0.2 | — | — | — | — | View full callout |
| EC326-0241 | Flat-bottom for aluminium solid carbide end mill | 0.241 | — | — | — | — | View full callout |
| EC326-0300-01 | Flat-bottom for aluminium solid carbide end mill | 0.3 | 1.3 | 3.175 | 38 | — | Standard |
| EC326-0300-04 | Solid carbide end mill | 0.3 | — | — | — | — | View full callout |