For process engineers
The table is a production record, not a sales range.
DC326 — Solid carbide drill
A real production series with 542 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 542
- Diameter span
- 0.04–3.175 mm
- Coating
- Uncoated
What the catalogue commits to
Production capability
Min. diameter 0.03 mm
Diameter tolerance
-0.003 mm — as stated in the 2026–2027 product catalogue.
Standard diameter range
0.03-3.03 mm
Catalogue reference
2026–2027 product catalogue, printed page P6. The full EDP table is available on request as a PDF.
Typical application
Engineering plastics, copper alloys, stainless steel, aluminium, graphite and ceramics.
Part numbers in DC326
542 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC326-1430Repeat order | Solid carbide drill | 1.43 | 10 | 3 | 38 | — | Standard |
| DC326-1440 | Solid carbide drill | 1.44 | 10 | 3 | 38 | — | Standard |
| DC326-1450Repeat order | Solid carbide drill | 1.45 | 10 | 3 | 38 | — | Standard |
| DC326-1460 | Solid carbide drill | 1.46 | 10 | 3 | 38 | — | Standard |
| DC326-1460-02 | Solid carbide drill | 1.46 | 5 | 3.175 | 38 | 140° | Standard |
| DC326-1470 | Solid carbide drill | 1.47 | 10 | 3 | 38 | — | Standard |
| DC326-1480 | Solid carbide drill | 1.48 | 10 | 3 | 38 | — | Standard |
| DC326-1490 | Solid carbide drill | 1.49 | 10 | 3 | 38 | — | Standard |
| DC326-1500Repeat order | Solid carbide drill | 1.5 | 10 | 3 | 38 | — | Standard |
| DC326-1500-03 | Solid carbide drill | 1.5 | 7.5 | 3 | 38 | — | Standard |
| DC326-1500-05 | Solid carbide drill | 1.5 | 5 | 3 | 38 | — | Standard |
| DC326-1500-08 | Solid carbide drill | 1.5 | 10.2 | 3 | 38 | — | Standard |
| DC326-1500-09 | Solid carbide drill | 1.5 | — | — | — | 50° | View full callout |
| DC326-1500-10 | Solid carbide drill | 1.5 | 8 | 3 | 50 | 125° | Standard |
| DC326-1510 | Solid carbide drill | 1.51 | 10 | 3 | 38 | — | Standard |
| DC326-1510-02 | Solid carbide drill | 1.51 | 10 | 3.175 | 50 | — | Standard |
| DC326-1520Repeat order | Solid carbide drill | 1.52 | 10 | 3 | 38 | — | Standard |
| DC326-1530Repeat order | Solid carbide drill | 1.53 | 10 | 3 | 38 | — | Standard |
| DC326-1540 | Solid carbide drill | 1.54 | 10 | 3 | 38 | — | Standard |
| DC326-1540-01 | Solid carbide drill | 1.54 | 10.16 | 3.175 | 38 | 130° | Standard |
| DC326-1550Repeat order | Solid carbide drill | 1.55 | 10 | 3 | 38 | — | Standard |
| DC326-1560 | Solid carbide drill | 1.56 | 10 | 3 | 38 | — | Standard |
| DC326-1560-01 | Solid carbide drill | 1.56 | 3 | 3 | 38 | — | Standard |
| DC326-1570 | Solid carbide drill | 1.57 | 10 | 3 | 38 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.