For process engineers
The table is a production record, not a sales range.
DC526 — Coated solid carbide drill
A real production series with 37 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 37
- Diameter span
- 0.15–3.8 mm
- Coating
- Coated
Part numbers in DC526
37 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC526-0150-09-01 | Coated solid carbide drill | 0.15 | 2 | 3 | 38 | — | Standard |
| DC526-0150-09-02 | Coated solid carbide drill | 0.15 | 1 | 3 | 38 | — | Standard |
| DC526-0250-09-01 | Coated solid carbide drill | 0.25 | 5 | 3 | 38 | — | Standard |
| DC526-0250-09-05 | Coated solid carbide drill | 0.25 | 4.5 | 3.175 | 38 | — | Standard |
| DC526-0300-09-01 | Coated solid carbide drill | 0.3 | 5 | 3 | 38 | — | Standard |
| DC526-0400 | Coated solid carbide drill | 0.4 | 13.5 | 3.175 | 45 | 130° | Standard |
| DC526-0400-01 | Coated solid carbide drill | 0.4 | 6 | 3.175 | 38 | — | Standard |
| DC526-0600 | Coated solid carbide drill | 0.6 | 22 | 4 | 65 | — | Standard |
| DC526-0600-09-01 | Coated solid carbide drill | 0.6 | 12 | 4 | 50 | — | Standard |
| DC526-0620-09-01 | Coated solid carbide drill | 0.62 | 15 | 4 | 55 | — | Standard |
| DC526-0750-09-01 | Coated solid carbide drill | 0.75 | 10 | 4 | 50 | — | Standard |
| DC526-0750-09-02 | Coated solid carbide drill | 0.75 | 12 | 4 | 50 | — | Standard |
| DC526-0950 | Coated solid carbide drill | 0.95 | 25 | 4 | 50 | — | Standard |
| DC526-0960 | Coated solid carbide drill | 0.96 | 35 | 4 | 70 | — | Standard |
| DC526-1000 | Coated solid carbide drill | 1 | 43 | 4 | 80 | 120° | Standard |
| DC526-1000-09-01 | Coated solid carbide drill | 1 | 8.7 | 3.175 | 38 | — | Standard |
| DC526-1200-01 | Coated solid carbide drill | 1.2 | 25 | 4 | 60 | — | Standard |
| DC526-1200-02 | Coated solid carbide drill | 1.2 | — | — | — | — | View full callout |
| DC526-1200-03 | Coated solid carbide drill | 1.2 | 35 | 4 | 70 | — | Standard |
| DC526-1200-04 | Coated solid carbide drill | 1.2 | 50 | 4 | 80 | — | Standard |
| DC526-1240 | Coated solid carbide drill | 1.24 | 25 | 4 | 60 | — | Standard |
| DC526-1250-09-01 | Coated solid carbide drill | 1.25 | 30 | 4 | 70 | — | Standard |
| DC526-1260-09-01 | Coated solid carbide drill | 1.26 | — | — | — | — | View full callout |
| DC526-1270-09-01 | Coated solid carbide drill | 1.27 | — | — | — | 118° | View full callout |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.