For process engineers
The table is a production record, not a sales range.
DC726 — Straight-shank solid carbide drill
A real production series with 57 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 57
- Diameter span
- 0.5–8.6 mm
- Coating
- Uncoated
Part numbers in DC726
57 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC726-0500-01 | Straight-shank solid carbide drill | 0.5 | 25 | 0.5 | 40 | — | Standard |
| DC726-0500-02 | Straight-shank solid carbide drill | 0.5 | 7 | 0.5 | 28 | — | Standard |
| DC726-0800-01 | Straight-shank solid carbide drill | 0.8 | 30 | 0.8 | 50 | — | Standard |
| DC726-0800-02 | Straight-shank solid carbide drill | 0.8 | 30 | 0.8 | 70 | — | Standard |
| DC726-0900-01 | Straight-shank solid carbide drill | 0.9 | 11 | 0.9 | 32 | — | Standard |
| DC726-0900-02 | Straight-shank solid carbide drill | 0.9 | 12 | 0.9 | 50 | — | Standard |
| DC726-0980 | Straight-shank solid carbide drill | 0.98 | 15 | 0.98 | 50 | 118° | Standard |
| DC726-1000-05 | Straight-shank solid carbide drill | 1 | 35 | 1 | 75 | — | Standard |
| DC726-1000-06 | Straight-shank solid carbide drill | 1 | 20 | 1 | 60 | 118° | Standard |
| DC726-1000-07 | Straight-shank solid carbide drill | 1 | 25 | 1 | 60 | 118° | Standard |
| DC726-1100-01 | Straight-shank solid carbide drill | 1.1 | 14 | 1.1 | 36 | — | Standard |
| DC726-1100-02 | Straight-shank solid carbide drill | 1.1 | 20 | 1.1 | 50 | — | Standard |
| DC726-1180-01 | Straight-shank solid carbide drill | 1.18 | 15 | 1.18 | 50 | — | Standard |
| DC726-1300-03 | Straight-shank solid carbide drill | 1.3 | 16 | 1.3 | 38 | — | Standard |
| DC726-1600 | Straight-shank solid carbide drill | 1.6 | 18 | 1.6 | 50 | — | Standard |
| DC726-1700 | Straight-shank solid carbide drill | 1.7 | 35 | 1.7 | 70 | — | Standard |
| DC726-2000-05 | Straight-shank solid carbide drill | 2 | 18 | 2 | 50 | — | Standard |
| DC726-2050-04 | Straight-shank solid carbide drill | 2.05 | 20 | 2.05 | 50 | 118° | Standard |
| DC726-2100-01 | Straight-shank solid carbide drill | 2.1 | 24 | 2.1 | 49 | — | Standard |
| DC726-2100-02 | Straight-shank solid carbide drill | 2.1 | 25 | 2.1 | 50 | — | Standard |
| DC726-2100-04 | Straight-shank solid carbide drill | 2.1 | 25 | 2.1 | 50 | 90° | Standard |
| DC726-2150 | Straight-shank solid carbide drill | 2.15 | 25 | 2.15 | 50 | — | Standard |
| DC726-2200-01Repeat order | Straight-shank solid carbide drill | 2.2 | 25 | 2.2 | 50 | — | Standard |
| DC726-2200-02 | Straight-shank solid carbide drill | 2.2 | 25 | 2.2 | 50 | 90° | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.