For process engineers
The table is a production record, not a sales range.
DC826 — Solid carbide drill
A real production series with 399 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 399
- Diameter span
- 0.13–10.3 mm
- Coating
- Uncoated
What the catalogue commits to
Production capability
Min. diameter 0.15 mm
Catalogue reference
2026–2027 product catalogue, printed page P40. The full EDP table is available on request as a PDF.
Typical application
General purpose carbide drilling for metal and laminate stacks.
Part numbers in DC826
399 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC826-5100 | Solid carbide drill | 5.1 | 26 | 6 | 60 | — | Standard |
| DC826-5150 | Solid carbide drill | 5.15 | 28 | 6 | 60 | — | Standard |
| DC826-5200-01 | Solid carbide drill | 5.2 | 26 | 6 | 60 | — | Standard |
| DC826-5250 | Solid carbide drill | 5.25 | 30 | 6 | 60 | 118° | Standard |
| DC826-5300-01 | Solid carbide drill | 5.3 | 26 | 6 | 60 | — | Standard |
| DC826-5400-01 | Solid carbide drill | 5.4 | 26 | 6 | 60 | — | Standard |
| DC826-5400-02 | Solid carbide drill | 5.4 | 25 | 6 | 50 | — | Standard |
| DC826-5500 | Solid carbide drill | 5.5 | 26 | 6 | 60 | — | Standard |
| DC826-5500-02 | Solid carbide drill | 5.5 | 44 | 6 | 82 | — | Standard |
| DC826-5500-04 | Solid carbide drill | 5.5 | 25 | 6 | 50 | — | Standard |
| DC826-5550 | Solid carbide drill | 5.55 | 25 | 6 | 50 | — | Standard |
| DC826-5580 | Solid carbide drill | 5.58 | 22 | 6 | 50 | — | Standard |
| DC826-5600-01 | Solid carbide drill | 5.6 | 26 | 6 | 60 | — | Standard |
| DC826-5800-02 | Solid carbide drill | 5.8 | 25 | 6 | 60 | 118° | Standard |
| DC826-6000-02 | Solid carbide drill | 6 | 10 | 8 | 50 | 118° | Standard |
| DC826-6000-03 | Solid carbide drill | 6 | 26 | 6 | 60 | — | Standard |
| DC826-6000-05 | Solid carbide drill | 6 | 18 | 8 | 50 | 118° | Standard |
| DC826-6100-01 | Solid carbide drill | 6.1 | 28 | 8 | 60 | — | Standard |
| DC826-6300-01 | Solid carbide drill | 6.3 | 28 | 8 | 60 | — | Standard |
| DC826-6500-01 | Solid carbide drill | 6.5 | 28 | 8 | 60 | — | Standard |
| DC826-6600-01 | Solid carbide drill | 6.6 | 28 | 8 | 60 | — | Standard |
| DC826-6800-01 | Solid carbide drill | 6.8 | 28 | 8 | 60 | — | Standard |
| DC826-7000 | Solid carbide drill | 7 | 28 | 8 | 60 | — | Standard |
| DC826-7100-01 | Solid carbide drill | 7.1 | 30 | 8 | 60 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.