For process engineers
The table is a production record, not a sales range.
DC826L — Extended-length solid carbide drill
A real production series with 136 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 136
- Diameter span
- 0.1–11.2 mm
- Coating
- Uncoated
Part numbers in DC826L
136 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC826L-4500-01 | Extended-length solid carbide drill | 4.5 | 50 | 6 | 90 | 118° | Standard |
| DC826L-4600 | Extended-length solid carbide drill | 4.6 | 36 | 6 | 75 | — | Standard |
| DC826L-4700 | Extended-length solid carbide drill | 4.7 | 36 | 6 | 75 | — | Standard |
| DC826L-4800 | Extended-length solid carbide drill | 4.8 | 36 | 6 | 75 | — | Standard |
| DC826L-5000 | Extended-length solid carbide drill | 5 | 36 | 6 | 75 | — | Standard |
| DC826L-5030-01 | Extended-length solid carbide drill | 5.03 | 25 | 6 | 75 | 118° | Standard |
| DC826L-5100-01 | Extended-length solid carbide drill | 5.1 | 35 | 6 | 75 | 137° | Standard |
| DC826L-6000-01 | Extended-length solid carbide drill | 6 | 40 | 6 | 75 | — | Standard |
| DC826L-6000-02 | Extended-length solid carbide drill | 6 | 40 | 6 | 75 | 118° | Standard |
| DC826L-6030-01 | Extended-length solid carbide drill | 6.03 | 25 | 8 | 75 | 118° | Standard |
| DC826L-6800 | Extended-length solid carbide drill | 6.8 | 48 | 8 | 100 | — | Standard |
| DC826L-7000 | Extended-length solid carbide drill | 7 | 48 | 8 | 100 | — | Standard |
| DC826L-7300 | Extended-length solid carbide drill | 7.3 | 50 | 8 | 100 | — | Standard |
| DC826L-8300-01 | Extended-length solid carbide drill | 8.3 | 56 | 10 | 100 | — | Standard |
| DC826L-8500 | Extended-length solid carbide drill | 8.5 | 56 | 10 | 100 | — | Standard |
| DC826L-8600 | Extended-length solid carbide drill | 8.6 | 56 | 10 | 100 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.