For process engineers
The table is a production record, not a sales range.
DCS626 — Left-hand step solid carbide drill
A real production series with 57 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 57
- Diameter span
- 0.85–5.53 mm
- Coating
- Uncoated
Part numbers in DCS626
57 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DCS626-0142 | Left-hand step solid carbide drill | 1.98 | — | — | — | 150° | View full callout |
| DCS626-0143 | Left-hand step solid carbide drill | 1.083 | — | — | — | 118° | View full callout |
| DCS626-0146 | Left-hand step solid carbide drill | 1.078 | — | — | — | 118° | View full callout |
| DCS626-0148 | Left-hand step solid carbide drill | 1.078 | — | — | — | 118° | View full callout |
| DCS626-0151 | Left-hand step solid carbide drill | 0.85 | — | — | — | 100° | View full callout |
| DCS626-0155 | Left-hand step solid carbide drill | 1.5 | — | — | — | 118° | View full callout |
| DCS626-0158 | Left-hand step solid carbide drill | 1 | — | — | — | 118° | View full callout |
| DCS626-0159 | Left-hand step solid carbide drill | 1.29 | — | — | — | 118° | View full callout |
| DCS626-0163 | Left-hand step solid carbide drill | 1.28 | — | — | — | 118° | View full callout |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.