For process engineers
The table is a production record, not a sales range.
HDC336 — TiN-coated solid carbide drill (not for shrink-fit holders)
A real production series with 179 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 179
- Diameter span
- 0.045–3 mm
- Coating
- TiN
Part numbers in HDC336
179 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| HDC336-2600-01 | TiN-coated solid carbide drill (not for shrink-fit holders) | 2.6 | 10 | 3 | 38 | 118° | Standard |
| HDC336-2650-01 | TiN-coated solid carbide drill (not for shrink-fit holders) | 2.65 | 8 | 3.175 | 38 | 118° | Standard |
| HDC336-2700-01 | TiN-coated solid carbide drill (not for shrink-fit holders) | 2.7 | 10 | 3.175 | 38 | 118° | Standard |
| HDC336-2750-01-02 | TiN-coated solid carbide drill (not for shrink-fit holders) | 2.75 | 10 | 3.175 | 38 | 118° | Standard |
| HDC336-2750-03 | Bronze-coated solid carbide drill (not for shrink-fit holders) | 2.75 | 10 | 3.175 | 38 | 118° | Standard |
| HDC336-2800-01-02 | TiN-coated solid carbide drill (not for shrink-fit holders) | 2.8 | 10 | 3.175 | 38 | 118° | Standard |
| HDC336-2850-01 | TiN-coated solid carbide drill (not for shrink-fit holders) | 2.85 | 10 | 3.175 | 38 | 118° | Standard |
| HDC336-2900-01 | TiN-coated solid carbide drill (not for shrink-fit holders) | 2.9 | 10 | 3.175 | 38 | 118° | Standard |
| HDC336-2950-01 | TiN-coated solid carbide drill (not for shrink-fit holders) | 2.95 | 10 | 3.175 | 38 | 118° | Standard |
| HDC336-3000-01 | TiN-coated solid carbide drill (not for shrink-fit holders) | 3 | 10 | 3.175 | 38 | 118° | Standard |
| HDC336-3000-01-03 | TiN-coated solid carbide drill (not for shrink-fit holders) | 3 | 12 | 3.175 | 38 | 118° | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.