ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION
Cutting diameter · 2.53 mm

Carbide tools, 2.53 mm

15 catalogue part numbers at this diameter, across 11 grinding series and 5 coatings. Every record carries its own flute, shank, overall length and geometry callout.

Diameter2.53mm
Part numbers15at this size
Series11in range
Coatings5available

01Part numbers at 2.53 mm

15 on record
Part numberDescriptionSeries Coating Flute (mm)Shank (mm)OAL (mm) Geometry
DC426-2530-04Black-coated solid carbide drillDC426black12338D2.53*12*3*38
HDC636-2530-01TiN-coated left-hand solid carbide drillHDC636TiN123.238D2.53*12*3.2*38*118°
DC426L-2530-04-02Black-coated extended-length solid carbide drillDC426Lblack38375D2.53*38*3*75
DC426L-2530-10-02Coated extended-length solid carbide drillDC426Lcoated38375D2.53*38*3*75
DC326-2530Solid carbide drillDC326uncoated12338D2.53*12*3*38
DC426L-2530-04-01Black-coated extended-length solid carbide drillDC426Lblack25360D2.53*25*3*60
DC326L-2530Extended-length solid carbide drillDC326Luncoated25360D2.53*25*3*60
DC426L-2530-03-01Bronze-coated extended-length solid carbide drillDC426Lbronze25360D2.53*25*3*60
DC836-2530-13-01Bronze-coated solid carbide drillDC836bronze18450D2.53*18*4*50
DC426-2530-03Bronze-coated solid carbide drillDC426bronze12338D2.53*12*3*38
HDC326-2530Solid carbide drill (not for shrink-fit holders)HDC326uncoated123.1738D2.53*12*3.175*38*118°
DC826L-2530-01Extended-length solid carbide drillDC826Luncoated25475D2.53*25*4*75*118°
DC126-2530-01Flat-bottom solid carbide drillDC126uncoated25475D2.53*25*4*75
DCS426-01-0004TiN-coated step solid carbide drillDCS426TiN———D2.53*3*120°+3.03*12*90°*4*50
DC826-2530-01Solid carbide drillDC826uncoated10438D2.53*10*4*38

All 15 part numbers at this diameter, with the geometry string as recorded.

02Grinding series using this diameter

11 series

Open a series page for its tolerance, capability note and full part matrix.

03Coatings available at this diameter

5 options
TiN
2 part numbers
At 2.53 mm
black
3 part numbers
At 2.53 mm
bronze
3 part numbers
At 2.53 mm
coated
1 part numbers
At 2.53 mm
uncoated
6 part numbers
At 2.53 mm

04Neighbouring diameters

Step to the next size