ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION
Cutting diameter · 2.54 mm

Carbide tools, 2.54 mm

7 catalogue part numbers at this diameter, across 6 grinding series and 3 coatings. Every record carries its own flute, shank, overall length and geometry callout.

Diameter2.54mm
Part numbers7at this size
Series6in range
Coatings3available

01Part numbers at 2.54 mm

7 on record
Part numberDescriptionSeries Coating Flute (mm)Shank (mm)OAL (mm) Geometry
DC426-2540-04Black-coated solid carbide drillDC426black12338D2.54*12*3*38
HDC636-2545-01TiN-coated left-hand solid carbide drillHDC636TiN123.238D2.545*12*3.2*38*118°
DC426L-2540-04-01Black-coated extended-length solid carbide drillDC426Lblack25360D2.54*25*3*60
HDC636-2540-01TiN-coated left-hand solid carbide drillHDC636TiN123.238D2.54*12*3.2*38*118°
HDC326-2540-01Solid carbide drill (not for shrink-fit holders)HDC326uncoated123.1738D2.54*12*3.175*38*118°
DC326-2540Solid carbide drillDC326uncoated12338D2.54*12*3*38
DC326L-2540Extended-length solid carbide drillDC326Luncoated25360D2.54*25*3*60

All 7 part numbers at this diameter, with the geometry string as recorded.

02Grinding series using this diameter

6 series

Open a series page for its tolerance, capability note and full part matrix.

03Coatings available at this diameter

3 options
TiN
2 part numbers
At 2.54 mm
black
2 part numbers
At 2.54 mm
uncoated
3 part numbers
At 2.54 mm

04Neighbouring diameters

Step to the next size