ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION
Special and custom geometry · series DCD326

DCD326 — Solid carbide cutting tool

31 catalogue part numbers, measured diameters from 0.1 to 8 mm, primary coating uncoated.

Diameter range0.1–8mm
CoatinguncoatedPrimary coating
Part numbers31on record
Catalogue page—

01Series specification

From the catalogue series record
Series codeDCD326
DescriptionSolid carbide cutting tool
Tooling familySpecial and custom geometry
Capability—
Tolerance—
Catalogue diameter range—
Measured diameter0.1–8 mm
Primary coatinguncoated
Application—
Catalogue page—
Part numbers on record31

02Part number matrix

31 records
Part numberDescriptionDiameter Flute (mm)Shank (mm)OAL (mm) PointCoatingGeometry
DCD326-0140Solid carbide drill0.14————uncoatedD0.14+0.22*0.35*3.175*38
DCD326-1000-04Solid carbide cutting tool1———60.0°uncoatedD1.00*4*60*60°
DCD326-0600-02Solid carbide cutting tool0.6345090.0°uncoatedD0.60*3*4*50*90°
DCD326-1500-02Solid carbide cutting tool1.5545090.0°uncoatedD1.50*5*4*50*90°
DCD326-0590Solid carbide drill0.59————uncoatedD0.59*6.4+1.3*6*3*38
DCD326-2000-02Solid carbide cutting tool2545090.0°uncoatedD2.00*5*4*50*90°
DCD326-2000-03Solid carbide cutting tool2545090.0°uncoatedD2.00*5*4*50*90°
DCD326-2000-05Solid carbide cutting tool2———34.0°uncoatedD2.00*3.27*34°+4.0*4.69*6*50
DCD326-2000-04Solid carbide cutting tool23450170.0°uncoatedD2.0*3*4*50*170°
DCD326-3175Solid carbide cutting tool3.17153.173890.0°uncoatedD3.175*15*3.175*38*90°
DCD326-4000Solid carbide cutting tool4———90.0°uncoatedD4.0*90°*4*50
DCD326-5000Solid carbide cutting tool5———90.0°uncoatedD5.0*90°*5*50
DCD326-6000Solid carbide cutting tool6———90.0°uncoatedD6.0*90°*6*50
DCD326-8000Solid carbide cutting tool8———120.0°uncoatedD8.00*8*60*120°
DCD326-0140-01Solid carbide drill0.14———19.14°uncoatedD0.14*(0.3)*19.14°*3.175*38
DCD326-0100-01Solid carbide drill0.1———160.0°uncoatedD0.10+0.18*0.35*3.175*38*160°
DCD326-0700-01Solid carbide cutting tool0.753.1738—uncoatedD0.70*5*3.175*38
DCD326-0700Solid carbide drill0.7———30.0°uncoatedD0.70*30°*9*1.40*3*38
DCD326-0800-01Solid carbide cutting tool0.853.1738—uncoatedD0.80*5*3.175*38
DCD326-1000Solid carbide drill1181.8350.0°uncoatedD1.00*18*1.80*3*50
DCD326-1500-04Solid carbide cutting tool1.5533850.0°uncoatedD1.50*5*3*38*50°
DCD326-1560Solid carbide drill1.56252.05360.0°uncoatedD1.56*25*2.05*3*60
DCD326-1600-01Solid carbide cutting tool1.683.173890.0°uncoatedD1.60*8*3.175*38*90°
DCD326-3175-01Solid carbide cutting tool3.1783.173890.0°uncoatedD3.175*8*3.175*38*90°
DCD326-3000-01Solid carbide cutting tool33.6133830.0°uncoatedD3.00*3.61*3*38*30°
DCD326-3000-03Solid carbide cutting tool32338120.0°uncoatedD3.00*2.0*3*38*120°
DCD326-3000-04Solid carbide cutting tool32.5533860.0°uncoatedD3.00*2.55*3*38*60°
DCD326-0360-01Solid carbide cutting tool0.360.533890.0°uncoatedD0.36*0.5*3*38*90°
DCD326-0200-01Solid carbide cutting tool0.2———90.0°uncoatedD0.20(+0/-0.01)*1*4*50*90°
DCD326-3000-05Solid carbide cutting tool31.4533890.0°uncoatedD3.00*1.45*3*38*90°
DCD326-3000-06Solid carbide cutting tool3———90.0°uncoatedD3.00*90°*3*38

Showing 31 of 31 part numbers in this series. Flute, shank and overall length are catalogue values; the geometry string is reproduced verbatim, including multi-diameter callouts.

03Coatings & geometry

1 coatings on record
uncoated
31 part numbers
In DCD326
Geometry callouts in this series
  • D0.14+0.22*0.35*3.175*38 · DCD326-0140
  • D1.00*4*60*60° · DCD326-1000-04
  • D0.60*3*4*50*90° · DCD326-0600-02
  • D1.50*5*4*50*90° · DCD326-1500-02

04Frequently asked questions

What diameter range does this series cover?

The catalogue records a measured range of 0.1–8 mm for DCD326. Individual diameters are listed in the part matrix above.

Which coatings are available on this series?

The primary coating recorded for the series is uncoated. Across the 31 part numbers on record, the coatings shown in section 03 are the ones actually assigned to those records.

Where does this series sit in the catalogue?

DCD326 is listed on catalogue page —. Its capability note is: —. Use the part number or the full geometry string when enquiring.

05Adjacent series

Special and custom geometry

Other series in the same tooling family. Each opens its own specification and part matrix.

Back to all series