For process engineers
The table is a production record, not a sales range.
DC126 — Flat-bottom solid carbide drill
A real production series with 45 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 45
- Diameter span
- 0.224–7.9 mm
- Coating
- Uncoated
Part numbers in DC126
45 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC126-1200-02 | Flat-bottom solid carbide drill | 1.2 | 10 | 4 | 50 | — | Standard |
| DC126-1200-03 | Flat-bottom solid carbide drill | 1.2 | 25 | 3 | 70 | — | Standard |
| DC126-1200-04 | Flat-bottom solid carbide drill | 1.2 | 35 | 3 | 75 | — | Standard |
| DC126-1200-05 | Flat-bottom solid carbide drill | 1.2 | 45 | 3 | 90 | — | Standard |
| DC126-1200-06 | Flat-bottom solid carbide drill | 1.2 | 30 | 3 | 75 | — | Standard |
| DC126-1200-07 | Flat-bottom solid carbide drill | 1.2 | 12 | 3 | 50 | — | Standard |
| DC126-1300-01 | Flat-bottom solid carbide drill | 1.3 | — | — | — | — | View full callout |
| DC126-1500 | Flat-bottom solid carbide drill | 1.5 | — | — | — | — | View full callout |
| DC126-1500-01 | Flat-bottom solid carbide drill | 1.5 | 35 | 4 | 70 | — | Standard |
| DC126-1530-01 | Flat-bottom solid carbide drill | 1.53 | 25 | 4 | 75 | — | Standard |
| DC126-1600-01 | Flat-bottom solid carbide drill | 1.6 | 10 | 3 | 50 | — | Standard |
| DC126-1800-01 | Flat-bottom solid carbide drill | 1.8 | 16 | 3 | 60 | — | Standard |
| DC126-1800-02 | Flat-bottom solid carbide drill | 1.8 | 15 | 4 | 50 | — | Standard |
| DC126-2000-01 | Flat-bottom solid carbide drill | 2 | 35 | 4 | 70 | — | Standard |
| DC126-2100 | Flat-bottom solid carbide drill | 2.1 | 25 | 2.1 | 50 | 180° | Standard |
| DC126-2450 | Flat-bottom solid carbide drill | 2.45 | 14 | 4 | 50 | — | Standard |
| DC126-2500 | Flat-bottom solid carbide drill | 2.5 | 14 | 4 | 50 | — | Standard |
| DC126-2530-01 | Flat-bottom solid carbide drill | 2.53 | 25 | 4 | 75 | — | Standard |
| DC126-3200 | Flat-bottom solid carbide drill | 3.2 | 17 | 4 | 50 | — | Standard |
| DC126-3300 | Flat-bottom solid carbide drill | 3.3 | 17 | 4 | 50 | — | Standard |
| DC126-7900-01 | Flat-bottom solid carbide drill | 7.9 | 36 | 8 | 75 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.