For process engineers
The table is a production record, not a sales range.
DC826 — Solid carbide drill
A real production series with 399 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 399
- Diameter span
- 0.13–10.3 mm
- Coating
- Uncoated
What the catalogue commits to
Production capability
Min. diameter 0.15 mm
Catalogue reference
2026–2027 product catalogue, printed page P40. The full EDP table is available on request as a PDF.
Typical application
General purpose carbide drilling for metal and laminate stacks.
Part numbers in DC826
399 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC826-0880-06 | Solid carbide drill | 0.88 | 3 | 4 | 75 | — | Standard |
| DC826-0880-07 | Solid carbide drill | 0.88 | 3.5 | 4 | 75 | 118° | Standard |
| DC826-0880-08 | Solid carbide drill | 0.88 | 4 | 4 | 40 | — | Standard |
| DC826-0890-03 | Solid carbide drill | 0.89 | 2.5 | 4 | 50 | 135° | Standard |
| DC826-0890-04 | Solid carbide drill | 0.89 | 2.5 | 4 | 40 | 150° | Standard |
| DC826-0900 | Solid carbide drill | 0.9 | 6 | 4 | 60 | 90° | Standard |
| DC826-0900-01 | Solid carbide drill | 0.9 | 12 | 4 | 50 | — | Standard |
| DC826-0900-02 | Solid carbide drill | 0.9 | 15 | 4 | 50 | — | Standard |
| DC826-0900-05 | Solid carbide drill | 0.9 | 6 | 4 | 50 | — | Standard |
| DC826-0900-06 | Solid carbide drill | 0.9 | 3.27 | 4 | 50 | 118° | Standard |
| DC826-0900-07 | Solid carbide drill | 0.9 | — | — | — | 90° | View full callout |
| DC826-0900-10 | Solid carbide drill | 0.9 | 3.5 | 6 | 40 | 120° | Standard |
| DC826-0900-11 | Solid carbide drill | 0.9 | 8 | 4 | 50 | 140° | Standard |
| DC826-0910-02 | Solid carbide drill | 0.91 | — | — | — | 158° | View full callout |
| DC826-0910-04 | Solid carbide drill | 0.91 | — | — | — | 165° | View full callout |
| DC826-0920-03 | Solid carbide drill | 0.92 | — | — | — | 118° | View full callout |
| DC826-0940-01 | Solid carbide drill | 0.94 | 10 | 4 | 75 | — | Standard |
| DC826-0950-06 | Solid carbide drill | 0.95 | 3 | 4 | 50 | 140° | Standard |
| DC826-0960-01 | Solid carbide drill | 0.96 | 4 | 4 | 40 | 140° | Standard |
| DC826-0970-02 | Solid carbide drill | 0.97 | 6 | 4 | 40 | 118° | Standard |
| DC826-0980-02 | Solid carbide drill | 0.98 | 6 | 4 | 50 | 140° | Standard |
| DC826-1000 | Solid carbide drill | 1 | 8 | 4 | 50 | — | Standard |
| DC826-1000-08 | Solid carbide drill | 1 | 6 | 4 | 50 | 118° | Standard |
| DC826-1000-13 | Solid carbide drill | 1 | 7 | 4 | 60 | 160° | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.