For process engineers
The table is a production record, not a sales range.
DC826 — Solid carbide drill
A real production series with 399 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 399
- Diameter span
- 0.13–10.3 mm
- Coating
- Uncoated
What the catalogue commits to
Production capability
Min. diameter 0.15 mm
Catalogue reference
2026–2027 product catalogue, printed page P40. The full EDP table is available on request as a PDF.
Typical application
General purpose carbide drilling for metal and laminate stacks.
Part numbers in DC826
399 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC826-1450-08 | Solid carbide drill | 1.45 | 5 | 4 | 40 | 90° | Standard |
| DC826-1450-09 | Solid carbide drill | 1.45 | 8 | 4 | 50 | 118° | Standard |
| DC826-1450-12 | Solid carbide drill | 1.45 | 3 | 4 | 50 | 118° | Standard |
| DC826-1470-01 | Solid carbide drill | 1.47 | 8 | 4 | 50 | — | Standard |
| DC826-1480-01 | Solid carbide drill | 1.48 | — | — | — | 160° | View full callout |
| DC826-1500-04 | Solid carbide drill | 1.5 | 9 | 4 | 50 | — | Standard |
| DC826-1500-05 | Solid carbide drill | 1.5 | 12 | 4 | 50 | — | Standard |
| DC826-1500-06 | Solid carbide drill | 1.5 | 10 | 4 | 60 | 118° | Standard |
| DC826-1500-07High-runner | Solid carbide drill | 1.5 | 10.8 | 6 | 45 | 140° | Standard |
| DC826-1500-08 | Solid carbide drill | 1.5 | — | — | — | — | View full callout |
| DC826-1500-12 | Solid carbide drill | 1.5 | 12 | 4 | 50 | 118° | Standard |
| DC826-1500-13 | Solid carbide drill | 1.5 | 4 | 4 | 50 | 118° | Standard |
| DC826-1500-14 | Solid carbide drill | 1.5 | 18 | 4 | 58 | 140° | Standard |
| DC826-1500-15 | Solid carbide drill | 1.5 | — | — | — | — | View full callout |
| DC826-1520-02 | Solid carbide drill | 1.52 | 10 | 4 | 50 | — | Standard |
| DC826-1530-01 | Solid carbide drill | 1.53 | 10 | 4 | 40 | — | Standard |
| DC826-1560 | Solid carbide drill | 1.56 | 7 | 4 | 50 | 160° | Standard |
| DC826-1600 | Solid carbide drill | 1.6 | 12 | 4 | 50 | 118° | Standard |
| DC826-1600-01 | Solid carbide drill | 1.6 | 8 | 4 | 50 | — | Standard |
| DC826-1600-02 | Solid carbide drill | 1.6 | 6 | 4 | 60 | 118° | Standard |
| DC826-1600-04 | Solid carbide drill | 1.6 | 11 | 4 | 50 | — | Standard |
| DC826-1600-05 | Solid carbide drill | 1.6 | 12 | 4 | 90 | 129° | Standard |
| DC826-1600-06 | Solid carbide drill | 1.6 | 7 | 6 | 60 | 118° | Standard |
| DC826-1600-08 | Solid carbide drill | 1.6 | 15 | 4 | 50 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.